On May 12, 2009, at 2:06 PM, Wolfgang Denk wrote:
The current device tree for the MPC8272ADS assumes a mapping of 32 MB of NOR flash at 0xFE00.0000, while there are actually only 8 MB on the boards, mapped at 0xFF80.0000. When booting an uImage with such a device tree, the kernel crashes because 0xFE00.0000 is not mapped. Also introduce aliases for serial[01] and ethernet[01]. Signed-off-by: Wolfgang Denk <w...@denx.de> Cc: Scott Wood <scottw...@freescale.com> cc: Kumar Gala <ga...@kernel.crashing.org> --- I am not really sure what the typical flash size on MPC8272ADS boards is. The board I used for testing is marked as "Prototype", so it may not be the release configuration. On the other hand, the manual also says 8 MB, Vitaly Borduk confirms 8 MB on his board, too, and Scott Wood eventually tested only with cuImage which fixes up the localbus mappings, thus eventually concealing the issue. I'm posting this as reference in case the 8 MB should turn out to be correct. -- wd arch/powerpc/boot/dts/mpc8272ads.dts | 19 +++++++++++++------ 1 files changed, 13 insertions(+), 6 deletions(-)
applied to next. - k _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev