On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> On Friday 05 June 2009, Subrata Modak wrote:
> > Correct, it fixes the issue. However, since few changes might have gone
> > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > a retake of the earlier one, but on the latest code. 
> 
> And it got mangled a bit along the way.  Plus, the original one
> goofed up Kconfig dependency displays ... both issues fixed in
> this version, against current mainline GIT.
> 
> If someone can verify all four PPC/OF/OHCI configs build on
> on PPC64, I'm OK with it.
> 
> - Dave

Dave,

Sorry for being late. The patch fixes the issue on the latest git for
PPC64. Infact, the whole drivers/usb/host/ builds just fine:

linux-2.6 # make drivers/usb/host/
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-powerpc
  CALL    scripts/checksyscalls.sh
  CC      drivers/usb/host/ohci-hcd.o
  CC      drivers/usb/host/pci-quirks.o
  CC      drivers/usb/host/uhci-hcd.o
  LD      drivers/usb/host/built-in.o
  CC [M]  drivers/usb/host/isp116x-hcd.o
  CC [M]  drivers/usb/host/u132-hcd.o

You can check in the patch now.

Regards--
Subrata

> 
> 
> ========== CUT HERE
> From: Arnd Bergmann <a...@arndb.de>
> Subject: fix build failure for PPC64 randconfig [usb/ohci]
> 
> We could just make the USB_OHCI_HCD_PPC_OF option implicit
> and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> and USB_OHCI_HCD_PPC_OF_LE are set.
> 
> [ dbrown...@users.sourceforge.net: fix patch manglation and dependencies ]
> 
> Signed-off-by: Arnd Bergmann <a...@arndb.de>
> Resent-by: Subrata Modak <subr...@linux.vnet.ibm.com>
> Signed-off-by: David Brownell <dbrown...@users.sourceforge.net>
> ---
>  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
>  1 file changed, 15 insertions(+), 14 deletions(-)
> 
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
>         Enables support for the USB controller on the MPC52xx or
>         STB03xxx processor chip.  If unsure, say Y.
> 
> -config USB_OHCI_HCD_PPC_OF
> -     bool "OHCI support for PPC USB controller on OF platform bus"
> -     depends on USB_OHCI_HCD && PPC_OF
> -     default y
> -     ---help---
> -       Enables support for the USB controller PowerPC present on the
> -       OpenFirmware platform bus.
> -
>  config USB_OHCI_HCD_PPC_OF_BE
> -     bool "Support big endian HC"
> -     depends on USB_OHCI_HCD_PPC_OF
> -     default y
> +     bool "OHCI support for OF platform bus (big endian)"
> +     depends on USB_OHCI_HCD && PPC_OF
>       select USB_OHCI_BIG_ENDIAN_DESC
>       select USB_OHCI_BIG_ENDIAN_MMIO
> +     ---help---
> +       Enables support for big-endian USB controllers present on the
> +       OpenFirmware platform bus.
> 
>  config USB_OHCI_HCD_PPC_OF_LE
> -     bool "Support little endian HC"
> -     depends on USB_OHCI_HCD_PPC_OF
> -     default n
> +     bool "OHCI support for OF platform bus (little endian)"
> +     depends on USB_OHCI_HCD && PPC_OF
>       select USB_OHCI_LITTLE_ENDIAN
> +     ---help---
> +       Enables support for little-endian USB controllers present on the
> +       OpenFirmware platform bus.
> +
> +config USB_OHCI_HCD_PPC_OF
> +     bool
> +     depends on USB_OHCI_HCD && PPC_OF
> +     default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> 
>  config USB_OHCI_HCD_PCI
>       bool "OHCI support for PCI-bus USB controllers"
> 

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to