This patch converts the m25p80 driver so that now it uses .id_table
for device matching, making it properly detect devices on OpenFirmware
platforms (prior to this patch the driver misdetected non-JEDEC chips,
seeing all chips as "m25p80").
Also, now jedec_probe() only does jedec probing, nothing else. If it
is not able to detect a chip, NULL is returned and the driver fall
backs to the information specified by the platform (platform_data, or
exact ID).
Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
---
drivers/mtd/devices/m25p80.c | 152 +++++++++++++++++++++++-------------------
1 files changed, 84 insertions(+), 68 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 10ed195..7c3efff 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -21,6 +21,7 @@
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/math64.h>
+#include <linux/mod_devicetable.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -462,8 +463,6 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to,
size_t len,
*/
struct flash_info {
- char *name;
-
/* JEDEC id zero means "no ID" (most older chips); otherwise it has
* a high byte of zero plus three data bytes: the manufacturer id,
* then a two byte device id.
@@ -481,74 +480,83 @@ struct flash_info {
#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly
*/
};
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+ (&(struct flash_info) { \
+ .jedec_id = (_jedec_id), \
+ .ext_id = (_ext_id), \
+ .sector_size = (_sector_size), \
+ .n_sectors = (_n_sectors), \
+ .flags = (_flags), \
+ })
/* NOTE: double check command sets and memory organization when you add
* more flash chips. This current list focusses on newer chips, which
* have been converging on command sets which including JEDEC ID.
*/
-static struct flash_info __devinitdata m25p_data [] = {
-
+static const struct spi_device_id m25p_ids[] = {
/* Atmel -- some are (confusingly) marketed as "DataFlash" */
- { "at25fs010", 0x1f6601, 0, 32 * 1024, 4, SECT_4K, },
- { "at25fs040", 0x1f6604, 0, 64 * 1024, 8, SECT_4K, },
+ { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) },
+ { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) },
- { "at25df041a", 0x1f4401, 0, 64 * 1024, 8, SECT_4K, },
- { "at25df641", 0x1f4800, 0, 64 * 1024, 128, SECT_4K, },
+ { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) },
+ { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
- { "at26f004", 0x1f0400, 0, 64 * 1024, 8, SECT_4K, },
- { "at26df081a", 0x1f4501, 0, 64 * 1024, 16, SECT_4K, },
- { "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
- { "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
+ { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) },
+ { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
+ { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
+ { "at26df321", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
/* Macronix */
- { "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, },
+ { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/
- { "s25sl004a", 0x010212, 0, 64 * 1024, 8, },
- { "s25sl008a", 0x010213, 0, 64 * 1024, 16, },
- { "s25sl016a", 0x010214, 0, 64 * 1024, 32, },
- { "s25sl032a", 0x010215, 0, 64 * 1024, 64, },
- { "s25sl064a", 0x010216, 0, 64 * 1024, 128, },
- { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, },
- { "s25sl12801", 0x012018, 0x0301, 64 * 1024, 256, },
+ { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
+ { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) },
+ { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
+ { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
+ { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
+ { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
+ { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
- { "sst25vf040b", 0xbf258d, 0, 64 * 1024, 8, SECT_4K, },
- { "sst25vf080b", 0xbf258e, 0, 64 * 1024, 16, SECT_4K, },
- { "sst25vf016b", 0xbf2541, 0, 64 * 1024, 32, SECT_4K, },
- { "sst25vf032b", 0xbf254a, 0, 64 * 1024, 64, SECT_4K, },
+ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K) },
+ { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K) },
+ { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K) },
+ { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K) },
/* ST Microelectronics -- newer production may have feature updates */
- { "m25p05", 0x202010, 0, 32 * 1024, 2, },
- { "m25p10", 0x202011, 0, 32 * 1024, 4, },
- { "m25p20", 0x202012, 0, 64 * 1024, 4, },
- { "m25p40", 0x202013, 0, 64 * 1024, 8, },
- { "m25p80", 0, 0, 64 * 1024, 16, },
- { "m25p16", 0x202015, 0, 64 * 1024, 32, },
- { "m25p32", 0x202016, 0, 64 * 1024, 64, },
- { "m25p64", 0x202017, 0, 64 * 1024, 128, },
- { "m25p128", 0x202018, 0, 256 * 1024, 64, },
-
- { "m45pe10", 0x204011, 0, 64 * 1024, 2, },
- { "m45pe80", 0x204014, 0, 64 * 1024, 16, },
- { "m45pe16", 0x204015, 0, 64 * 1024, 32, },
-
- { "m25pe80", 0x208014, 0, 64 * 1024, 16, },
- { "m25pe16", 0x208015, 0, 64 * 1024, 32, SECT_4K, },
+ { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) },
+ { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) },
+ { "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) },
+ { "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) },
+ { "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) },
+ { "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) },
+ { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
+ { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
+ { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
+
+ { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) },
+ { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) },
+ { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) },
+
+ { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) },
+ { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) },
/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
- { "w25x10", 0xef3011, 0, 64 * 1024, 2, SECT_4K, },
- { "w25x20", 0xef3012, 0, 64 * 1024, 4, SECT_4K, },
- { "w25x40", 0xef3013, 0, 64 * 1024, 8, SECT_4K, },
- { "w25x80", 0xef3014, 0, 64 * 1024, 16, SECT_4K, },
- { "w25x16", 0xef3015, 0, 64 * 1024, 32, SECT_4K, },
- { "w25x32", 0xef3016, 0, 64 * 1024, 64, SECT_4K, },
- { "w25x64", 0xef3017, 0, 64 * 1024, 128, SECT_4K, },
+ { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
+ { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) },
+ { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
+ { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
+ { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
+ { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+ { },
};
+MODULE_DEVICE_TABLE(spi, m25p_ids);
-static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+static const struct spi_device_id *__devinit jedec_probe(struct spi_device
*spi)
{
int tmp;
u8 code = OPCODE_RDID;
@@ -575,16 +583,14 @@ static struct flash_info *__devinit jedec_probe(struct
spi_device *spi)
ext_jedec = id[3] << 8 | id[4];
- for (tmp = 0, info = m25p_data;
- tmp < ARRAY_SIZE(m25p_data);
- tmp++, info++) {
+ for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) {
+ info = m25p_ids[tmp].data;
if (info->jedec_id == jedec) {
if (info->ext_id != 0 && info->ext_id != ext_jedec)
continue;
- return info;
+ return &m25p_ids[tmp];
}
}
- dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
return NULL;
}
@@ -594,7 +600,8 @@ static struct flash_info *__devinit jedec_probe(struct
spi_device *spi)
* matches what the READ command supports, at least until this driver
* understands FAST_READ (for clocks over 25 MHz).
*/
-static int __devinit m25p_probe(struct spi_device *spi)
+static int __devinit m25p_probe(struct spi_device *spi,
+ const struct spi_device_id *id)
{
struct flash_platform_data *data;
struct m25p *flash;
@@ -608,32 +615,40 @@ static int __devinit m25p_probe(struct spi_device *spi)
*/
data = spi->dev.platform_data;
if (data && data->type) {
- for (i = 0, info = m25p_data;
- i < ARRAY_SIZE(m25p_data);
- i++, info++) {
- if (strcmp(data->type, info->name) == 0)
- break;
+ for (i = 0; i < ARRAY_SIZE(m25p_ids) - 1; i++) {
+ id = &m25p_ids[i];
+ info = m25p_ids[i].data;
+ if (strcmp(data->type, id->name))
+ continue;
+ break;
}
/* unrecognized chip? */
- if (i == ARRAY_SIZE(m25p_data)) {
+ if (i == ARRAY_SIZE(m25p_ids) - 1) {
DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n",
dev_name(&spi->dev), data->type);
info = NULL;
/* recognized; is that chip really what's there? */
} else if (info->jedec_id) {
- struct flash_info *chip = jedec_probe(spi);
+ id = jedec_probe(spi);
- if (!chip || chip != info) {
+ if (id != &m25p_ids[i]) {
dev_warn(&spi->dev, "found %s, expected %s\n",
- chip ? chip->name : "UNKNOWN",
- info->name);
+ id ? id->name : "UNKNOWN",
+ m25p_ids[i].name);
info = NULL;
}
}
- } else
- info = jedec_probe(spi);
+ } else {
+ const struct spi_device_id *jid;
+
+ jid = jedec_probe(spi);
+ if (jid)
+ id = jid;
+
+ info = id ? id->data : NULL;
+ }
if (!info)
return -ENODEV;
@@ -680,7 +695,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
flash->mtd.dev.parent = &spi->dev;
- dev_info(&spi->dev, "%s (%lld Kbytes)\n", info->name,
+ dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
(long long)flash->mtd.size >> 10);
DEBUG(MTD_DEBUG_LEVEL2,
@@ -766,7 +781,8 @@ static struct spi_driver m25p80_driver = {
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
- .probe = m25p_probe,
+ .id_table = m25p_ids,
+ .probe_id = m25p_probe,
.remove = __devexit_p(m25p_remove),
/* REVISIT: many of these chips have deep power-down modes, which
--
1.6.3.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
