Kumar Gala wrote: > On Oct 20, 2009, at 5:21 PM, Németh Márton wrote: > >> Hi Grant, >> Hello List, >> >> is there anybody who was successfully run Linux kernel on Freescale >> MPC5554 >> [1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded >> PowerPC >> controllers have the e200z6 core. >> >> Is there anybody who is working with these controllers or with the >> e200z6 core? >> >> References: >> [1] Freescale MPC5554 >> http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5554 >> >> [2] MPC5553/MPC5554 Microcontroller Reference Manual >> http://www.freescale.com/files/32bit/doc/ref_manual/MPC5553_MPC5554_RM.pdf >> >> [3] Freescale MPC5534 >> http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5534 >> >> [4] MPC5534 Microcontroller Reference Manual >> http://www.freescale.com/files/32bit/doc/ref_manual/MPC5534RM.pdf > > I'm not aware of anyone working on Linux for these chips based on the > e200z6. What application do you have that you want to run Linux on > them?
At this time I am just looking to see what kind of operating systems these chips can run. I think the first step to run Linux would be that the MMU and serial console starts to work then maybe I would check how the PF_CAN interface ( http://lwn.net/Articles/253425/ ) would work on this device if a FlexCAN2 driver is available. Is there any other powerpc port with e200z6 core? Regards, Márton Németh _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev