Signed-off-by: Liu Yu <yu....@freescale.com> --- drivers/net/phy/marvell.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 files changed, 38 insertions(+), 0 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 6f69b9b..65ed385 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -63,6 +63,7 @@ #define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb #define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3 #define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4 +#define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9 #define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000 #define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000 @@ -269,6 +270,43 @@ static int m88e1111_config_init(struct phy_device *phydev) return err; } + if (phydev->interface == PHY_INTERFACE_MODE_RTBI) { + temp = phy_read(phydev, MII_M1111_PHY_EXT_CR); + if (temp < 0) + return temp; + temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY); + err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp); + if (err < 0) + return err; + + temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); + if (temp < 0) + return temp; + temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES); + temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO; + err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); + if (err < 0) + return err; + + /* soft reset */ + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + do + temp = phy_read(phydev, MII_BMCR); + while (temp & BMCR_RESET); + + temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); + if (temp < 0) + return temp; + temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES); + temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO; + err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); + if (err < 0) + return err; + } + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); if (err < 0) return err; -- 1.6.4 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev