Hi Roman, Wolfgang Grandegger wrote: > Roman Fietze wrote: >> Hello, >> >> I think this is a never ending story. This error still happens under >> higher load every few seconds, until I get a "PHY: f0003000:00 - Link >> is Down", on my box easiliy reproducable after maybe 15 to 30 seconds. >> I can recover using "ip link set down/up dev eth0". >> >> I double checked that I'm using the most recent version of this driver >> (checked with DENX, benh master/next, using Wolfgang Denk's version of >> the 2.6.33), this includes the locking patches from Asier Llano, the >> hard setting of mii_speed in the PHY mdio transfer routine of course. >> I tried all 8 combinations of PLDIS, BSDIS and SE, with and without >> CONFIG_NOT_COHERENT_CACHE. >> >> As some of you probably remember, I'm running this controller under >> high load on FEC, ATA and LPC. As soon as "the" load is going above a >> certain level I get those FEC RFIFO errors, sometimes ATA errors >> (MWDMA2) and sometimes even lost SDMA interrupts using BestComm with >> the SCLPC (now switched back to simple PIO). I quite sure almost all >> of this is the BestComm's fault. > > This problem shows up quickly with NAPI, but I have never observed it > with the current version. The error occurs when the software is not able > to readout the messages in time. Unfortunately, dealing with Bestcomm is > a pain. > >> Did somebody already try the latest NAPI patches, which might give me >> a slight chance to have a workaround? Any idea or upcoming patch to >> address this problem once more, and if it's just by recovering e.g. >> within mpc52xx_fec_mdio_transfer's timeout using some other dirty >> workaround? > > Yes, I have a NAPI version ready for testing. I will roll it out as RFC > today or tomorrow.
I just sent out the patch. Would be nice if you, or somebody else, could do some testing and provide some feedback. FYI, I will be out of office next week. Thanks, Wolfgang. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev