A future version of the MPC8610 HPCD's ASoC DMA driver will probe on individual
DMA channel nodes, so the DMA controller nodes' compatible string must be listed
in mpc8610_ids[] for the probe to work.
Also remove the "gianfar" compatible from mpc8610_ids[], since there is no
gianfar (or any other networking device) on the 8610.
Signed-off-by: Timur Tabi <ti...@freescale.com>
---
Kumar, the ASoC mainters are willing to pick up this patch, but they want an
ACK from you first. Or, you could pick it up, since by itself it's harmless.
arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 5abe137..018cc67 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -83,7 +83,8 @@ static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
{ .compatible = "fsl,mpc8610-guts", },
{ .compatible = "simple-bus", },
- { .compatible = "gianfar", },
+ /* So that the DMA channel nodes can be probed individually: */
+ { .compatible = "fsl,eloplus-dma", },
{}
};
--
1.6.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
