On Wed, Nov 17, 2010 at 03:28:39PM -0800, John Bonesio wrote:
> This patch remove unused properties in dts files in preparation of refactoring
> the dts files for MPC5200b based boards.
>
> Signed-off-by: John Bonesio <bo...@secretlab.ca>
Applied, thanks.
g.
> ---
>
> arch/powerpc/boot/dts/cm5200.dts | 2 --
> arch/powerpc/boot/dts/lite5200b.dts | 3 ---
> arch/powerpc/boot/dts/media5200.dts | 2 --
> arch/powerpc/boot/dts/motionpro.dts | 2 --
> arch/powerpc/boot/dts/pcm030.dts | 2 --
> arch/powerpc/boot/dts/pcm032.dts | 2 --
> 6 files changed, 0 insertions(+), 13 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/cm5200.dts
> b/arch/powerpc/boot/dts/cm5200.dts
> index 9369dcd..d549897 100644
> --- a/arch/powerpc/boot/dts/cm5200.dts
> +++ b/arch/powerpc/boot/dts/cm5200.dts
> @@ -230,8 +230,6 @@
> reg = <0 0 0x2000000>;
> bank-width = <2>;
> device-width = <2>;
> - #size-cells = <1>;
> - #address-cells = <1>;
> };
> };
> };
> diff --git a/arch/powerpc/boot/dts/lite5200b.dts
> b/arch/powerpc/boot/dts/lite5200b.dts
> index a74b790..c0a4e45 100644
> --- a/arch/powerpc/boot/dts/lite5200b.dts
> +++ b/arch/powerpc/boot/dts/lite5200b.dts
> @@ -174,7 +174,6 @@
>
> p...@2000 { // PSC1
> compatible =
> "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - cell-index = <0>;
> reg = <0x2000 0x100>;
> interrupts = <2 1 0>;
> };
> @@ -198,7 +197,6 @@
> // PSC4 in uart mode example
> //ser...@2600 { // PSC4
> // compatible =
> "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - // cell-index = <3>;
> // reg = <0x2600 0x100>;
> // interrupts = <2 11 0>;
> //};
> @@ -206,7 +204,6 @@
> // PSC5 in uart mode example
> //ser...@2800 { // PSC5
> // compatible =
> "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - // cell-index = <4>;
> // reg = <0x2800 0x100>;
> // interrupts = <2 12 0>;
> //};
> diff --git a/arch/powerpc/boot/dts/media5200.dts
> b/arch/powerpc/boot/dts/media5200.dts
> index a70ef68..e027f45 100644
> --- a/arch/powerpc/boot/dts/media5200.dts
> +++ b/arch/powerpc/boot/dts/media5200.dts
> @@ -185,8 +185,6 @@
> // PSC6 in uart mode
> console: p...@2c00 { // PSC6
> compatible =
> "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - cell-index = <5>;
> - port-number = <0>; // Logical port assignment
> reg = <0x2c00 0x100>;
> interrupts = <2 4 0>;
> };
> diff --git a/arch/powerpc/boot/dts/motionpro.dts
> b/arch/powerpc/boot/dts/motionpro.dts
> index f6261ea..3ab4666 100644
> --- a/arch/powerpc/boot/dts/motionpro.dts
> +++ b/arch/powerpc/boot/dts/motionpro.dts
> @@ -277,8 +277,6 @@
> reg = <0 0 0x01000000>;
> bank-width = <2>;
> device-width = <2>;
> - #size-cells = <1>;
> - #address-cells = <1>;
> };
> };
> };
> diff --git a/arch/powerpc/boot/dts/pcm030.dts
> b/arch/powerpc/boot/dts/pcm030.dts
> index 3a4f554..f3e30bb 100644
> --- a/arch/powerpc/boot/dts/pcm030.dts
> +++ b/arch/powerpc/boot/dts/pcm030.dts
> @@ -196,7 +196,6 @@
>
> p...@2400 { /* PSC3 in UART mode */
> compatible =
> "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - cell-index = <2>;
> reg = <0x2400 0x100>;
> interrupts = <2 3 0>;
> };
> @@ -207,7 +206,6 @@
>
> p...@2c00 { /* PSC6 in UART mode */
> compatible =
> "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - cell-index = <5>;
> reg = <0x2c00 0x100>;
> interrupts = <2 4 0>;
> };
> diff --git a/arch/powerpc/boot/dts/pcm032.dts
> b/arch/powerpc/boot/dts/pcm032.dts
> index 17596c7..e0f2702 100644
> --- a/arch/powerpc/boot/dts/pcm032.dts
> +++ b/arch/powerpc/boot/dts/pcm032.dts
> @@ -196,7 +196,6 @@
>
> p...@2400 { /* PSC3 in UART mode */
> compatible =
> "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - cell-index = <2>;
> reg = <0x2400 0x100>;
> interrupts = <2 3 0>;
> };
> @@ -207,7 +206,6 @@
>
> p...@2c00 { /* PSC6 in UART mode */
> compatible =
> "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - cell-index = <5>;
> reg = <0x2c00 0x100>;
> interrupts = <2 4 0>;
> };
>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
