Hi, Up to now I've been working ltib over and ads5121 based board.
So as not to work with frozen images I would like to change to u-boot and kernel from denx. I did the following: - Download and compile u-boot: OK. - Download and kernel (mpc512x_defconfig): compilation fails if I enable "Freescale MPC5xxx onboard CAN controller" with this message: . LD kernel/built-in.o CC drivers/net/can/mscan/mscan.o CC drivers/net/can/mscan/mpc5xxx_can.o drivers/net/can/mscan/mpc5xxx_can.c: In function 'mpc5xxx_can_probe': drivers/net/can/mscan/mpc5xxx_can.c:263: error: 'of_dev' undeclared (first use in this function) . I have not much experience with this stuff but I've notice that there are recent patches on mpc5xxx.c file, last from 2011-02-28 so I suppose this should work. Am I missing something? I also wonder if ads5121-Rev4 is fully supported in Linux Denx. Thanks, Moises.
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev