On Tue, Mar 22, 2011 at 09:27:29AM +0100, Heiko Schocher wrote:
> - add commandline options:
> sm501fb.mode:
> Specify resolution as "<xres>x<yres>[-<bpp>][@<refresh>]"
> sm501fb.bpp:
> Specify bit-per-pixel if not specified mode
>
> - Add support for encoding display mode information
> in the device tree using verbatim EDID block.
>
> If the "edid" entry in the "smi,sm501" node is present,
> the driver will build mode database using EDID data
> and allow setting the display modes from this database.
>
> Signed-off-by: Heiko Schocher <h...@denx.de>
Merged, thanks.
g.
> cc: Wolfram Sang <w.s...@pengutronix.de>
> cc: Grant Likely <grant.lik...@secretlab.ca>
> cc: Benjamin Herrenschmidt <b...@kernel.crashing.org>
> cc: linux-fb...@vger.kernel.org
> cc: devicetree-disc...@ozlabs.org
> cc: Ben Dooks <b...@simtec.co.uk>
> cc: Vincent Sanders <vi...@simtec.co.uk>
> cc: Samuel Ortiz <sa...@linux.intel.com>
> cc: linux-ker...@vger.kernel.org
> cc: Randy Dunlap <rdun...@xenotime.net>
> cc: Wolfgang Denk <w...@denx.de>
> cc: Paul Mundt <let...@linux-sh.org>
> ---
> - changes since v1:
> add Ben Dooks, Vincent Sanders and Samuel Ortiz to cc, as suggested from
> Paul Mundt.
> - changes since v2:
> add comments from Randy Dunlap:
> - move parameter documentation to Documentation/fb/sm501.txt
> - changes since v3:
> - rebased against v2.6.38-rc2
> - split in 3 patches
> - of support patch
> - i/o routine patch
> - edid support patch
> - changes since v4:
> - add "info->pdata = &sm501fb_def_pdata;" in sm501fb_probe()
> as Paul Mundt suggested (and I wrongly deleted)
> - move kfree(info->edid_data); to patch 3/4
> as edid_data is only allocated in the CONFIG_OF case
> - changes for v6:
> - repost complete patchserie
> - rebased against current head
>
> Documentation/fb/sm501.txt | 10 +++++++
> drivers/video/sm501fb.c | 65 ++++++++++++++++++++++++++++++++++++++++---
> 2 files changed, 70 insertions(+), 5 deletions(-)
> create mode 100644 Documentation/fb/sm501.txt
>
> diff --git a/Documentation/fb/sm501.txt b/Documentation/fb/sm501.txt
> new file mode 100644
> index 0000000..8d17aeb
> --- /dev/null
> +++ b/Documentation/fb/sm501.txt
> @@ -0,0 +1,10 @@
> +Configuration:
> +
> +You can pass the following kernel command line options to sm501
> videoframebuffer:
> +
> + sm501fb.bpp= SM501 Display driver:
> + Specifiy bits-per-pixel if not specified by 'mode'
> +
> + sm501fb.mode= SM501 Display driver:
> + Specify resolution as
> + "<xres>x<yres>[-<bpp>][@<refresh>]"
> diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
> index 5df406c..f31252c 100644
> --- a/drivers/video/sm501fb.c
> +++ b/drivers/video/sm501fb.c
> @@ -41,6 +41,26 @@
> #include <linux/sm501.h>
> #include <linux/sm501-regs.h>
>
> +#include "edid.h"
> +
> +static char *fb_mode = "640x480-16@60";
> +static unsigned long default_bpp = 16;
> +
> +static struct fb_videomode __devinitdata sm501_default_mode = {
> + .refresh = 60,
> + .xres = 640,
> + .yres = 480,
> + .pixclock = 20833,
> + .left_margin = 142,
> + .right_margin = 13,
> + .upper_margin = 21,
> + .lower_margin = 1,
> + .hsync_len = 69,
> + .vsync_len = 3,
> + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
> + .vmode = FB_VMODE_NONINTERLACED
> +};
> +
> #define NR_PALETTE 256
>
> enum sm501_controller {
> @@ -77,6 +97,7 @@ struct sm501fb_info {
> void __iomem *regs2d; /* 2d remapped registers */
> void __iomem *fbmem; /* remapped framebuffer */
> size_t fbmem_len; /* length of remapped region */
> + u8 *edid_data;
> };
>
> /* per-framebuffer private data */
> @@ -1725,9 +1746,16 @@ static int sm501fb_init_fb(struct fb_info *fb,
> fb->var.vmode = FB_VMODE_NONINTERLACED;
> fb->var.bits_per_pixel = 16;
>
> + if (info->edid_data) {
> + /* Now build modedb from EDID */
> + fb_edid_to_monspecs(info->edid_data, &fb->monspecs);
> + fb_videomode_to_modelist(fb->monspecs.modedb,
> + fb->monspecs.modedb_len,
> + &fb->modelist);
> + }
> +
> if (enable && (pd->flags & SM501FB_FLAG_USE_INIT_MODE) && 0) {
> /* TODO read the mode from the current display */
> -
> } else {
> if (pd->def_mode) {
> dev_info(info->dev, "using supplied mode\n");
> @@ -1737,12 +1765,34 @@ static int sm501fb_init_fb(struct fb_info *fb,
> fb->var.xres_virtual = fb->var.xres;
> fb->var.yres_virtual = fb->var.yres;
> } else {
> - ret = fb_find_mode(&fb->var, fb,
> + if (info->edid_data)
> + ret = fb_find_mode(&fb->var, fb, fb_mode,
> + fb->monspecs.modedb,
> + fb->monspecs.modedb_len,
> + &sm501_default_mode, default_bpp);
> + else
> + ret = fb_find_mode(&fb->var, fb,
> NULL, NULL, 0, NULL, 8);
>
> - if (ret == 0 || ret == 4) {
> - dev_err(info->dev,
> - "failed to get initial mode\n");
> + switch (ret) {
> + case 1:
> + dev_info(info->dev, "using mode specified in "
> + "@mode\n");
> + break;
> + case 2:
> + dev_info(info->dev, "using mode specified in "
> + "@mode with ignored refresh rate\n");
> + break;
> + case 3:
> + dev_info(info->dev, "using mode default "
> + "mode\n");
> + break;
> + case 4:
> + dev_info(info->dev, "using mode from list\n");
> + break;
> + default:
> + dev_info(info->dev, "ret = %d\n", ret);
> + dev_info(info->dev, "failed to find mode\n");
> return -EINVAL;
> }
> }
> @@ -2157,6 +2207,11 @@ static void __exit sm501fb_cleanup(void)
> module_init(sm501fb_init);
> module_exit(sm501fb_cleanup);
>
> +module_param_named(mode, fb_mode, charp, 0);
> +MODULE_PARM_DESC(mode,
> + "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
> +module_param_named(bpp, default_bpp, ulong, 0);
> +MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
> MODULE_AUTHOR("Ben Dooks, Vincent Sanders");
> MODULE_DESCRIPTION("SM501 Framebuffer driver");
> MODULE_LICENSE("GPL v2");
> --
> 1.7.4
>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
