On Sat, Jul 09, 2011 at 03:38:14PM -0500, Timur Tabi wrote:
> Instead of using ill-defined numbers (0, 1, and 2) for the monitor port, allow
> the user to specify the port by name ("dvi", "lvds", or "dlvds"). This works
> on the kernel command line, the module command-line, and the sysfs "monitor"
> device.
>
> Note that changing the monitor port does not currently work on the P1022DS,
> because the code that talks to the PIXIS FPGA is broken.
>
> Signed-off-by: Timur Tabi <ti...@freescale.com>
> Acked-by: Anatolij Gustschin <ag...@denx.de>
> ---
> arch/powerpc/platforms/512x/mpc512x_shared.c | 22 +++-----
> arch/powerpc/platforms/85xx/p1022_ds.c | 47 ++++++++---------
> arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 55 +++++++++----------
> arch/powerpc/sysdev/fsl_soc.h | 25 ++++++---
> drivers/video/fsl-diu-fb.c | 74
> +++++++++++++++++++-------
> 5 files changed, 128 insertions(+), 95 deletions(-)
>
Applied, thanks.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
