- fix NAND_CMD_READID command for ONFI detect.
- add NAND_CMD_PARAM command to read the ONFI parameter page.
Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com>
---
drivers/mtd/nand/fsl_elbc_nand.c | 19 ++++++++++++-------
1 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 742bf73..08a3aba 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -349,19 +349,24 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd,
unsigned int command,
fsl_elbc_run_command(mtd);
return;
- /* READID must read all 5 possible bytes while CEB is active */
case NAND_CMD_READID:
- dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
+ case NAND_CMD_PARAM:
+ dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD %x\n", command);
out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) |
(FIR_OP_UA << FIR_OP1_SHIFT) |
(FIR_OP_RBW << FIR_OP2_SHIFT));
- out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
- /* nand_get_flash_type() reads 8 bytes of entire ID string */
- out_be32(&lbc->fbcr, 8);
- elbc_fcm_ctrl->read_bytes = 8;
+ out_be32(&lbc->fcr, command << FCR_CMD0_SHIFT);
+ /* reads 8 bytes of entire ID string */
+ if (NAND_CMD_READID == command) {
+ out_be32(&lbc->fbcr, 8);
+ elbc_fcm_ctrl->read_bytes = 8;
+ } else {
+ out_be32(&lbc->fbcr, 256);
+ elbc_fcm_ctrl->read_bytes = 256;
+ }
elbc_fcm_ctrl->use_mdr = 1;
- elbc_fcm_ctrl->mdr = 0;
+ elbc_fcm_ctrl->mdr = column;
set_addr(mtd, 0, 0, 0);
fsl_elbc_run_command(mtd);
--
1.6.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
