From: Jerry Huang <chang-ming.hu...@freescale.com> The p1020mbg-pc has the similar feature as the p1020rdb. Therefore, p1020mbg-pc use the same platform file as the p1/p2 rdb board. Overview of P1020MBG-PC platform: - DDR3 2GB - NOR flash 64MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch - eTSEC2 (SGMII PHY) - eTSEC3 (RGMII PHY) - SDHC - 2 USB ports - 4 TDM ports - PCIe (Lane1 to dual SATA controller)
Signed-off-by: Jerry Huang <chang-ming.hu...@freescale.com> --- arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 23 +++++++++++++++++++++++ 1 files changed, 23 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index 6de10bf..5c6334a 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -178,6 +178,7 @@ static int __init mpc85xxrdb_publish_pci_device(void) machine_arch_initcall(p2020_rdb, mpc85xxrdb_publish_pci_device); machine_arch_initcall(p1020_rdb, mpc85xxrdb_publish_pci_device); machine_arch_initcall(p1020_rdb_pc, mpc85xxrdb_publish_pci_device); +machine_arch_initcall(p1020_mbg_pc, mpc85xxrdb_publish_pci_device); machine_arch_initcall(p2020_rdb_pc, mpc85xxrdb_publish_pci_device); machine_arch_initcall(p1024_rdb, mpc85xxrdb_publish_pci_device); machine_arch_initcall(p1021_rdb_pc, mpc85xxrdb_publish_pci_device); @@ -199,6 +200,7 @@ static int __init mpc85xxrdb_publish_devices(void) machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices); machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices); machine_device_initcall(p1020_rdb_pc, mpc85xxrdb_publish_devices); +machine_device_initcall(p1020_mbg_pc, mpc85xxrdb_publish_devices); machine_device_initcall(p2020_rdb_pc, mpc85xxrdb_publish_devices); machine_device_initcall(p1024_rdb, mpc85xxrdb_publish_devices); machine_device_initcall(p1021_rdb_pc, mpc85xxrdb_publish_devices); @@ -260,6 +262,13 @@ static int __init p1025_rdb_probe(void) return of_flat_dt_is_compatible(root, "fsl,P1025RDB"); } +static int __init p1020_mbg_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1020MBG-PC"); +} + define_machine(p2020_rdb) { .name = "P2020 RDB", .probe = p2020_rdb_probe, @@ -357,3 +366,17 @@ define_machine(p1025_rdb) { .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, }; + +define_machine(p1020_mbg_pc) { + .name = "P1020 MBG-PC", + .probe = p1020_mbg_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- 1.7.5.4 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev