On Jul 10, 2012, at 5:22 AM, Xie Shaohui-B21989 wrote:

> Hi, All,
> 
> Is there any concern for this patch, it's been a long time.
> Thanks!
> 
> 
> Best Regards, 
> Shaohui Xie 

As commented, we should use PPC_FSL_BOOK3E, not CONFIG_PPC_FSL_BOOK3E.

- k

> 
> 
>> -----Original Message-----
>> From: Xie Shaohui-B21989
>> Sent: Friday, May 11, 2012 1:34 PM
>> To: linux-watch...@vger.kernel.org; linuxppc-dev@lists.ozlabs.org
>> Cc: Xie Shaohui-B21989
>> Subject: [PATCH 2/2][v2] powerpc/watchdog: replace CONFIG_FSL_BOOKE with
>> CONFIG_PPC_FSL_BOOK3E
>> 
>> CONFIG_FSL_BOOKE is only defined in 32-bit, CONFIG_PPC_FSL_BOOK3E is
>> defined in both 32-bit and 64-bit, so use CONFIG_PPC_FSL_BOOK3E to make
>> driver work in 32-bit & 64-bit.
>> 
>> Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
>> ---
>> changes for v2:
>> use PPC_FSL_BOOK3E instead of FSL_SOC_BOOKE.
>> 
>> drivers/watchdog/Kconfig     |    8 ++++----
>> drivers/watchdog/booke_wdt.c |    4 ++--
>> 2 files changed, 6 insertions(+), 6 deletions(-)
>> 
>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index
>> 3709624..4373ca0 100644
>> --- a/drivers/watchdog/Kconfig
>> +++ b/drivers/watchdog/Kconfig
>> @@ -1094,10 +1094,10 @@ config BOOKE_WDT  config BOOKE_WDT_DEFAULT_TIMEOUT
>>      int "PowerPC Book-E Watchdog Timer Default Timeout"
>>      depends on BOOKE_WDT
>> -    default 38 if FSL_BOOKE
>> -    range 0 63 if FSL_BOOKE
>> -    default 3 if !FSL_BOOKE
>> -    range 0 3 if !FSL_BOOKE
>> +    default 38 if PPC_FSL_BOOK3E
>> +    range 0 63 if PPC_FSL_BOOK3E
>> +    default 3 if !PPC_FSL_BOOK3E
>> +    range 0 3 if !PPC_FSL_BOOK3E
>>      help
>>        Select the default watchdog timer period to be used by the PowerPC
>>        Book-E watchdog driver.  A watchdog "event" occurs when the bit
>> diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
>> index ce0ab44..338a437 100644
>> --- a/drivers/watchdog/booke_wdt.c
>> +++ b/drivers/watchdog/booke_wdt.c
>> @@ -37,7 +37,7 @@
>> u32 booke_wdt_enabled;
>> u32 booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT;
>> 
>> -#ifdef      CONFIG_FSL_BOOKE
>> +#ifdef      CONFIG_PPC_FSL_BOOK3E
>> #define WDTP(x)              ((((x)&0x3)<<30)|(((x)&0x3c)<<15))
>> #define WDTP_MASK    (WDTP(0x3f))
>> #else
>> @@ -190,7 +190,7 @@ static long booke_wdt_ioctl(struct file *file,
>>      case WDIOC_SETTIMEOUT:
>>              if (get_user(tmp, p))
>>                      return -EFAULT;
>> -#ifdef      CONFIG_FSL_BOOKE
>> +#ifdef      CONFIG_PPC_FSL_BOOK3E
>>              /* period of 1 gives the largest possible timeout */
>>              if (tmp > period_to_sec(1))
>>                      return -EINVAL;
>> --
>> 1.6.4
> 
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to