Hi, On Sat, Jul 20, 2013 at 09:16:49AM +1000, Benjamin Herrenschmidt wrote: > On Fri, 2013-07-19 at 20:43 +0300, Aaro Koskinen wrote: > > I booted a Xserve today with 3.11-rc1, and noticed the noise is coming > > from slots-fan (PCI fan?) which is always 99%, although the slots-temp is > > just 33. Is it on purpose the rm31 slots PID params are totally different > > from therm_pm72 slots params? It seems like they have been copied from > > pm72 "drive bay" PID params instead. > > Could be my mistake. What happens if you change them to match the old code ?
I tried the change below (use SLOTS_PID_* values from therm_pm72.h), and the noise level is considerably lower. The slots-fan stays at 19%, and slots-temp rises to 42'C but not higher after running couple of hours. diff --git a/drivers/macintosh/windfarm_rm31.c b/drivers/macintosh/windfarm_rm31.c index 0b9a79b..82fc86a 100644 --- a/drivers/macintosh/windfarm_rm31.c +++ b/drivers/macintosh/windfarm_rm31.c @@ -439,15 +439,15 @@ static void backside_setup_pid(void) /* Slots fan */ static const struct wf_pid_param slots_param = { - .interval = 5, - .history_len = 2, - .gd = 30 << 20, - .gp = 5 << 20, - .gr = 0, - .itarget = 40 << 16, - .additive = 1, - .min = 300, - .max = 4000, + .interval = 1, + .history_len = 20, + .gd = 0, + .gp = 0, + .gr = 0x00100000, + .itarget = 3200000, + .additive = 0, + .min = 20, + .max = 100, }; static void slots_fan_tick(void) _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev