We use host->ocr_mask to hold the voltage get from device-tree
node, In case host->ocr_mask was available, we use host->ocr_mask
as the final available voltage can be used by MMC/SD/SDIO card.
Signed-off-by: Haijun Zhang <haijun.zh...@freescale.com>
---
changes for V3:
- changed the type of mask
drivers/mmc/host/sdhci.c | 3 +++
include/linux/mmc/sdhci.h | 1 +
2 files changed, 4 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a78bd4f..57541e0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3119,6 +3119,9 @@ int sdhci_add_host(struct sdhci_host *host)
SDHCI_MAX_CURRENT_MULTIPLIER;
}
+ if (host->ocr_mask)
+ ocr_avail = host->ocr_mask;
+
mmc->ocr_avail = ocr_avail;
mmc->ocr_avail_sdio = ocr_avail;
if (host->ocr_avail_sdio)
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index e3c6a74..3e781b8 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -171,6 +171,7 @@ struct sdhci_host {
unsigned int ocr_avail_sdio; /* OCR bit masks */
unsigned int ocr_avail_sd;
unsigned int ocr_avail_mmc;
+ u32 ocr_mask; /* available voltages */
wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read
Ready interrupt */
unsigned int tuning_done; /* Condition flag set when
CMD19 succeeds */
--
1.8.0
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
