On Tue, Nov 05, 2013 at 11:12:00PM +0100, Arnaud Ebalard wrote: > Hi Jason, > > Jason Gunthorpe <jguntho...@obsidianresearch.com> writes: > > > Commit cc9d4598 'net: mv643xx_eth: use of_phy_connect if phy_node > > present' made the call to phy_scan optional, if the DT has a link to > > the phy node. > > > > However phy_scan has the side effect of calling phy_addr_set, which > > writes the phy MDIO address to the ethernet controller. If phy_addr_set > > is not called, and the bootloader has not set the correct address then > > the driver will fail to function. > > Thanks *a lot* for fixing this one! I had the issue on my ReadyNAS 102 > (Armada 370 based) which I had put on a todo list and temporarily
readynas duo v2? thx, Jason. > workarounded by including a 'ping whatever' call in my u-boot env in > order to force it to do the init. Without it, I was unable to properly > use the interface. With your fix, after multiple reboots to test it, > everything works as expected. So, FWIW: > > Tested-by: Arnaud Ebalard <a...@natisbad.org> > > Cheers, > > a+ _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev