PING.
Thanks,
Yuantian
> -----Original Message-----
> From: Tang Yuantian-B29983
> Sent: 2013年11月20日 星期三 17:05
> To: ga...@kernel.crashing.org
> Cc: devicet...@vger.kernel.org; linuxppc-dev@lists.ozlabs.org;
> mark.rutl...@arm.com; Wood Scott-B07421; grant.lik...@secretlab.ca; Tang
> Yuantian-B29983; Tang Yuantian-B29983; Li Yang-Leo-R58472
> Subject: [PATCH v7] clk: corenet: Adds the clock binding
>
> From: Tang Yuantian <yuantian.t...@freescale.com>
>
> Adds the clock bindings for Freescale PowerPC CoreNet platforms
>
> Signed-off-by: Tang Yuantian <yuantian.t...@freescale.com>
> Signed-off-by: Li Yang <le...@freescale.com>
> ---
> v7:
> - refined some properties' definitions
> v6:
> - splited the previous patch into 2 parts, one is for binding(this
> one),
> the other is for DTS modification(will submit once this gets
> accepted)
> - fixed typo
> - refined #clock-cells and clock-output-names properties
> - removed fixed-clock compatible string
> v5:
> - refine the binding document
> - update the compatible string
> v4:
> - add binding document
> - update compatible string
> - update the reg property
> v3:
> - fix typo
> v2:
> - add t4240, b4420, b4860 support
> - remove pll/4 clock from p2041, p3041 and p5020 board
> .../devicetree/bindings/clock/corenet-clock.txt | 128
> +++++++++++++++++++++
> 1 file changed, 128 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/corenet-
> clock.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt
> b/Documentation/devicetree/bindings/clock/corenet-clock.txt
> new file mode 100644
> index 0000000..609ba2b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/corenet-clock.txt
> @@ -0,0 +1,128 @@
> +* Clock Block on Freescale CoreNet Platforms
> +
> +Freescale CoreNet chips take primary clocking input from the external
> +SYSCLK signal. The SYSCLK input (frequency) is multiplied using
> +multiple phase locked loops (PLL) to create a variety of frequencies
> +which can then be passed to a variety of internal logic, including
> +cores and peripheral IP blocks.
> +Please refer to the Reference Manual for details.
> +
> +1. Clock Block Binding
> +
> +Required properties:
> +- compatible: Should contain a specific clock block compatible string
> + and a single chassis clock compatible string.
> + Clock block strings include, but not limited to, one of the:
> + * "fsl,p2041-clockgen"
> + * "fsl,p3041-clockgen"
> + * "fsl,p4080-clockgen"
> + * "fsl,p5020-clockgen"
> + * "fsl,p5040-clockgen"
> + * "fsl,t4240-clockgen"
> + * "fsl,b4420-clockgen"
> + * "fsl,b4860-clockgen"
> + Chassis clock strings include:
> + * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
> + * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
> +- reg: Offset and length of the clock register set
> +
> +Recommended properties:
> +- ranges: Allows valid translation between child's address space and
> + parent's. Must be present if the device has sub-nodes.
> +- #address-cells: Specifies the number of cells used to represent
> + physical base addresses. Must be present if the device has
> + sub-nodes and set to 1 if present
> +- #size-cells: Specifies the number of cells used to represent
> + the size of an address. Must be present if the device has
> + sub-nodes and set to 1 if present
> +
> +2. Clock Provider/Consumer Binding
> +
> +Most of the bindings are from the common clock binding[1].
> + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible : Should include one of the following:
> + * "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
> + * "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
> + * "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
> + * "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
> + * "fsl,qoriq-sysclk-1.0": for input system clock (v1.0)
> + * "fsl,qoriq-sysclk-2.0": for input system clock (v2.0)
> +- #clock-cells: From common clock binding. The number of cells in a
> + clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
> + clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
> + For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
> + clock-specifier cell may take the following values:
> + * 0 - equal to the PLL frequency
> + * 1 - equal to the PLL frequency divided by 2
> + * 2 - equal to the PLL frequency divided by 4
> +
> +Recommended properties:
> +- clocks: Should be the phandle of input parent clock
> +- clock-names: From common clock binding, indicates the clock name
> +- clock-output-names: From common clock binding, indicates the names of
> + output clocks
> +- reg: Should be the offset and length of clock block base address.
> + The length should be 4.
> +
> +Example for clock block and clock provider:
> +/ {
> + clockgen: global-utilities@e1000 {
> + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
> + ranges = <0x0 0xe1000 0x1000>;
> + reg = <0xe1000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + sysclk: sysclk {
> + #clock-cells = <0>;
> + compatible = "fsl,qoriq-sysclk-1.0";
> + clock-output-names = "sysclk";
> + }
> +
> + pll0: pll0@800 {
> + #clock-cells = <1>;
> + reg = <0x800 0x4>;
> + compatible = "fsl,qoriq-core-pll-1.0";
> + clocks = <&sysclk>;
> + clock-output-names = "pll0", "pll0-div2";
> + };
> +
> + pll1: pll1@820 {
> + #clock-cells = <1>;
> + reg = <0x820 0x4>;
> + compatible = "fsl,qoriq-core-pll-1.0";
> + clocks = <&sysclk>;
> + clock-output-names = "pll1", "pll1-div2";
> + };
> +
> + mux0: mux0@0 {
> + #clock-cells = <0>;
> + reg = <0x0 0x4>;
> + compatible = "fsl,qoriq-core-mux-1.0";
> + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> + clock-output-names = "cmux0";
> + };
> +
> + mux1: mux1@20 {
> + #clock-cells = <0>;
> + reg = <0x20 0x4>;
> + compatible = "fsl,qoriq-core-mux-1.0";
> + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> + clock-output-names = "cmux1";
> + };
> + };
> + }
> +
> +Example for clock consumer:
> +
> +/ {
> + cpu0: PowerPC,e5500@0 {
> + ...
> + clocks = <&mux0>;
> + ...
> + };
> + }
> --
> 1.8.0
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
