> -----Original Message----- > From: Hongbo Zhang [mailto:hongbo.zh...@freescale.com] > Sent: Thursday, December 12, 2013 5:57 PM > To: Liu Shengzhou-B36685; linuxppc-dev@lists.ozlabs.org; Wood Scott- > B07421 > Subject: Re: [PATCH 1/5] powerpc/85xx/dts: add third elo3 dma component > > Shengzhou, > I canceled my patch http://patchwork.ozlabs.org/patch/295157/ because the > original wrong elo3-dma-2.dtsi hadn't been merged. > But please pay attention to comments from Scott about my changes of > adding 208 for some interrupts, and take some actions if needed, or > further discussions. > > Below comments form Scott: > "The FSL MPIC binding should be updated to point out how this works. > Technically it's not a change to the binding itself, since it's defined > in terms of register offset, but the explanatory text says "So interrupt > 0 is at offset 0x0, interrupt 1 is at offset 0x20, and so on." which is > not accurate for these new high interrupt numbers." > Hongbo, Could you update FSL MPIC binding as Scott pointed out?
thanks, Shengzhou _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev