Concentrate the specific code for MPC8308 in the 'if' branch and handle MPC512x in the 'else' branch. This modification only reorders instructions but doesn't change behaviour.
Signed-off-by: Alexander Popov <a13xp0p0...@gmail.com> --- drivers/dma/mpc512x_dma.c | 42 +++++++++++++++++++++++++----------------- 1 file changed, 25 insertions(+), 17 deletions(-) diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 448750d..2ce248b 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -52,9 +52,17 @@ #define MPC_DMA_DESCRIPTORS 64 /* Macro definitions */ -#define MPC_DMA_CHANNELS 64 #define MPC_DMA_TCD_OFFSET 0x1000 +/* + * Maximum channel counts for individual hardware variants + * and the maximum channel count over all supported controllers, + * used for data structure size + */ +#define MPC8308_DMACHAN_MAX 16 +#define MPC512x_DMACHAN_MAX 64 +#define MPC_DMA_CHANNELS 64 + /* Arbitration mode of group and channel */ #define MPC_DMA_DMACR_EDCG (1 << 31) #define MPC_DMA_DMACR_ERGA (1 << 3) @@ -710,10 +718,10 @@ static int mpc_dma_probe(struct platform_device *op) dma = &mdma->dma; dma->dev = dev; - if (!mdma->is_mpc8308) - dma->chancnt = MPC_DMA_CHANNELS; + if (mdma->is_mpc8308) + dma->chancnt = MPC8308_DMACHAN_MAX; else - dma->chancnt = 16; /* MPC8308 DMA has only 16 channels */ + dma->chancnt = MPC512x_DMACHAN_MAX; dma->device_alloc_chan_resources = mpc_dma_alloc_chan_resources; dma->device_free_chan_resources = mpc_dma_free_chan_resources; dma->device_issue_pending = mpc_dma_issue_pending; @@ -747,7 +755,19 @@ static int mpc_dma_probe(struct platform_device *op) * - Round-robin group arbitration, * - Round-robin channel arbitration. */ - if (!mdma->is_mpc8308) { + if (mdma->is_mpc8308) { + /* MPC8308 has 16 channels and lacks some registers */ + out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA); + + /* enable snooping */ + out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE); + /* Disable error interrupts */ + out_be32(&mdma->regs->dmaeeil, 0); + + /* Clear interrupts status */ + out_be32(&mdma->regs->dmaintl, 0xFFFF); + out_be32(&mdma->regs->dmaerrl, 0xFFFF); + } else { out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_EDCG | MPC_DMA_DMACR_ERGA | MPC_DMA_DMACR_ERCA); @@ -768,18 +788,6 @@ static int mpc_dma_probe(struct platform_device *op) /* Route interrupts to IPIC */ out_be32(&mdma->regs->dmaihsa, 0); out_be32(&mdma->regs->dmailsa, 0); - } else { - /* MPC8308 has 16 channels and lacks some registers */ - out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA); - - /* enable snooping */ - out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE); - /* Disable error interrupts */ - out_be32(&mdma->regs->dmaeeil, 0); - - /* Clear interrupts status */ - out_be32(&mdma->regs->dmaintl, 0xFFFF); - out_be32(&mdma->regs->dmaerrl, 0xFFFF); } /* Register DMA engine */ -- 1.8.4.2 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev