On Thu, Apr 10, 2014 at 10:07:47PM +0800, Shawn Guo wrote:
> On Thu, Apr 10, 2014 at 07:23:12PM +0800, Nicolin Chen wrote:
> > The SAI mainly has the following clocks:
> > bus clock
> > control and configure registers and to generate synchronous
> > interrupts and DMA requests.
> >
> > mclk1, mclk2, mclk3
> > to generate the bit clock when the receiver or transmitter is
> > configured for an internally generated bit clock.
> >
> > So this patch adds these clocks and their clock controls to the driver,
> > meanwhile, corrects the existing DTS accordingly so those platforms can
> > benifit from the further feature with different clock sources.
> >
> > [ To concern the old DTB cases, I've added a bit of extra code to make
> > the driver compatible with them. And by marking clock NULL if failed
> > to get, the clk_prepare() or clk_get_rate() would easily return 0
> > so no further path should be broken. -- by Nicolin ]
>
> In this case, the arch/arm/boot/dts/vf610.dtsi can just go via IMX tree,
> since nothing should be broken on sound tree even without dts change?
You are right...I'll send the v6.
Thank you,
Nicolin
----
>
> Shawn
>
> >
> > Signed-off-by: Nicolin Chen <guangyu.c...@freescale.com>
> > Acked-by: Xiubo Li <li.xi...@freescale.com>
> > Acked-by: Shawn Guo <shawn....@linaro.org>
> > ---
> >
> > Changelog
> > v5:
> > * Dropped mclk preparing and enabling since we are not using them
> > currecntly.
> > * Made the change compatible to the old DTB.
> > * Added returned error value print.
> > v4:
> > * Merged into single patch.
> > * Fixed bus clock ID on vf610.
> > v3:
> > * Use int type for ret instead of u32.
> > * Added Acked-by and Tested-by from Xiubo Li.
> > v2:
> > * Appended two extra mclks to the driver since SAI actually has three.
> > * Renamed clock name to 'bus' and 'mclk' according to the reference manual.
> >
> > .../devicetree/bindings/sound/fsl-sai.txt | 9 +++--
> > arch/arm/boot/dts/vf610.dtsi | 6 ++--
> > sound/soc/fsl/fsl_sai.c | 38
> > ++++++++++++++++++++--
> > sound/soc/fsl/fsl_sai.h | 4 +++
> > 4 files changed, 50 insertions(+), 7 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > index 35c09fe..0f4e238 100644
> > --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > @@ -10,7 +10,8 @@ Required properties:
> > - compatible: Compatible list, contains "fsl,vf610-sai" or
> > "fsl,imx6sx-sai".
> > - reg: Offset and length of the register set for the device.
> > - clocks: Must contain an entry for each entry in clock-names.
> > -- clock-names : Must include the "sai" entry.
> > +- clock-names : Must include the "bus" for register access and "mclk1"
> > "mclk2"
> > + "mclk3" for bit clock and frame clock providing.
> > - dmas : Generic dma devicetree binding as described in
> > Documentation/devicetree/bindings/dma/dma.txt.
> > - dma-names : Two dmas have to be defined, "tx" and "rx".
> > @@ -30,8 +31,10 @@ sai2: sai@40031000 {
> > reg = <0x40031000 0x1000>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_sai2_1>;
> > - clocks = <&clks VF610_CLK_SAI2>;
> > - clock-names = "sai";
> > + clocks = <&clks VF610_CLK_PLATFORM_BUS>,
> > + <&clks VF610_CLK_SAI2>,
> > + <&clks 0>, <&clks 0>;
> > + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> > dma-names = "tx", "rx";
> > dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
> > <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
> > diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
> > index d31ce1b..4c3cd59 100644
> > --- a/arch/arm/boot/dts/vf610.dtsi
> > +++ b/arch/arm/boot/dts/vf610.dtsi
> > @@ -139,8 +139,10 @@
> > compatible = "fsl,vf610-sai";
> > reg = <0x40031000 0x1000>;
> > interrupts = <0 86 0x04>;
> > - clocks = <&clks VF610_CLK_SAI2>;
> > - clock-names = "sai";
> > + clocks = <&clks VF610_CLK_PLATFORM_BUS>,
> > + <&clks VF610_CLK_SAI2>,
> > + <&clks 0>, <&clks 0>;
> > + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> > status = "disabled";
> > };
> >
> > diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> > index db9f75e..5fff2e1 100644
> > --- a/sound/soc/fsl/fsl_sai.c
> > +++ b/sound/soc/fsl/fsl_sai.c
> > @@ -401,7 +401,15 @@ static int fsl_sai_startup(struct snd_pcm_substream
> > *substream,
> > struct snd_soc_dai *cpu_dai)
> > {
> > struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
> > + struct device *dev = &sai->pdev->dev;
> > u32 reg;
> > + int ret;
> > +
> > + ret = clk_prepare_enable(sai->bus_clk);
> > + if (ret) {
> > + dev_err(dev, "failed to enable bus clock: %d\n", ret);
> > + return ret;
> > + }
> >
> > if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> > reg = FSL_SAI_TCR3;
> > @@ -427,6 +435,8 @@ static void fsl_sai_shutdown(struct snd_pcm_substream
> > *substream,
> >
> > regmap_update_bits(sai->regmap, reg, FSL_SAI_CR3_TRCE,
> > ~FSL_SAI_CR3_TRCE);
> > +
> > + clk_disable_unprepare(sai->bus_clk);
> > }
> >
> > static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
> > @@ -559,7 +569,8 @@ static int fsl_sai_probe(struct platform_device *pdev)
> > struct fsl_sai *sai;
> > struct resource *res;
> > void __iomem *base;
> > - int irq, ret;
> > + char tmp[8];
> > + int irq, ret, i;
> >
> > sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL);
> > if (!sai)
> > @@ -582,12 +593,35 @@ static int fsl_sai_probe(struct platform_device *pdev)
> > return PTR_ERR(base);
> >
> > sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
> > - "sai", base, &fsl_sai_regmap_config);
> > + "bus", base, &fsl_sai_regmap_config);
> > +
> > + /* Compatible with old DTB cases */
> > + if (IS_ERR(sai->regmap))
> > + sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
> > + "sai", base, &fsl_sai_regmap_config);
> > if (IS_ERR(sai->regmap)) {
> > dev_err(&pdev->dev, "regmap init failed\n");
> > return PTR_ERR(sai->regmap);
> > }
> >
> > + /* No error out for old DTB cases but only mark the clock NULL */
> > + sai->bus_clk = devm_clk_get(&pdev->dev, "bus");
> > + if (IS_ERR(sai->bus_clk)) {
> > + dev_err(&pdev->dev, "failed to get bus clock: %ld\n",
> > + PTR_ERR(sai->bus_clk));
> > + sai->bus_clk = NULL;
> > + }
> > +
> > + for (i = 0; i < FSL_SAI_MCLK_MAX; i++) {
> > + sprintf(tmp, "mclk%d", i + 1);
> > + sai->mclk_clk[i] = devm_clk_get(&pdev->dev, tmp);
> > + if (IS_ERR(sai->mclk_clk[i])) {
> > + dev_err(&pdev->dev, "failed to get mclk%d clock: %ld\n",
> > + i + 1, PTR_ERR(sai->mclk_clk[i]));
> > + sai->mclk_clk[i] = NULL;
> > + }
> > + }
> > +
> > irq = platform_get_irq(pdev, 0);
> > if (irq < 0) {
> > dev_err(&pdev->dev, "no irq for node %s\n", np->full_name);
> > diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
> > index 677670d..0e6c9f5 100644
> > --- a/sound/soc/fsl/fsl_sai.h
> > +++ b/sound/soc/fsl/fsl_sai.h
> > @@ -119,6 +119,8 @@
> > #define FSL_SAI_CLK_MAST2 2
> > #define FSL_SAI_CLK_MAST3 3
> >
> > +#define FSL_SAI_MCLK_MAX 3
> > +
> > /* SAI data transfer numbers per DMA request */
> > #define FSL_SAI_MAXBURST_TX 6
> > #define FSL_SAI_MAXBURST_RX 6
> > @@ -126,6 +128,8 @@
> > struct fsl_sai {
> > struct platform_device *pdev;
> > struct regmap *regmap;
> > + struct clk *bus_clk;
> > + struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
> >
> > bool big_endian_regs;
> > bool big_endian_data;
> > --
> > 1.8.4
> >
> >
>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
