Hello Scott,

On 07/29/2014 02:58 PM, Scott Wood wrote:
> On Mon, 2014-07-28 at 06:51 +0000, Emil Medve wrote:
>> Hello Scott,
>>
>>
>> Scott Wood <scottwood <at> freescale.com> writes:
>>> On Wed, 2014-07-16 at 15:17 -0500, Shruti Kanetkar wrote:
>>>> +                  mdio <at> fd000 {
>>>> +                          /* For 10g interfaces */
>>>> +                          phy_xaui_slot1: xaui-phy <at> slot1 {
>>>> +                                  status = "disabled";
>>>> +                                  compatible = 
>>>> "ethernet-phy-ieee802.3-c45";
>>>> +                                  reg = <0x7>; /* default switch setting 
>>>> on slot1 of AMC2PEX */
>>>> +                          };
>>>
>>> Why xaui-phy and not ethernet-phy?
>>>
>>> As for the device_type discussion from v1, there is a generic binding
>>> that says device_type "should" be ethernet-phy.
>>
>> I have no strong feelings about this and we can use ethernet-phy, but:
>>
>> 1. The binding is old/stale (?) as it still uses device_type and the kernel
>> doesn't seem to use anymore the device_type for PHY(s)
> 
> Yes.
> 
>> 2. The binding asks "ethernet-phy" for the device_type property, not for the
>> name. As such TBI PHY(s) use (upstream) the tbi-phy@ node name
> 
> It shows ethernet-phy as the name in the example.  ePAPR urges generic
> node names (this was also a recommendation for IEEE1275), and has
> ethernet-phy on the preferred list.  Is a xaui-phy not an ethernet phy?

So you thinking somebody should cleanup all the sgmii-phy and tbi-phy
node names, huh?

It seems that a number of tbi-phy instances slipped by you:

1be62c6 powerpc/mpc85xx: Add BSC9132 QDS Support
bf57aeb powerpc/85xx: add the P1020RDB-PD DTS support
8a6be2b powerpc/85xx: Add TWR-P1025 board support

>>>> +                  mdio0: mdio <at> fc000 {
>>>> +                  };
>>>
>>> Why is the empty node needed?
>>
>> For the label
> 
> For mdio-parent-bus, or is there some other dts layer that makes this
> node non-empty?

'powerpc/corenet: Create the dts components for the DPAA FMan' -
http://patchwork.ozlabs.org/patch/370872 and 'powerpc/corenet: Add DPAA
FMan support to the SoC device tree(s)' -
http://patchwork.ozlabs.org/patch/370868 add content to said node


Cheers,
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to