Add support for mapping and unmapping of inbound rapidio windows. Signed-off-by: Martijn de Gouw <martijn.de.g...@prodrive-technologies.com> --- arch/powerpc/sysdev/fsl_rio.c | 104 +++++++++++++++++++++++++++++++++++++++++ arch/powerpc/sysdev/fsl_rio.h | 13 ++++++ 2 files changed, 117 insertions(+)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index c04b718..08d60f1 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -58,6 +58,19 @@ #define RIO_ISR_AACR 0x10120 #define RIO_ISR_AACR_AA 0x1 /* Accept All ID */ +#define RIWTAR_TRAD_VAL_SHIFT 12 +#define RIWTAR_TRAD_MASK 0x00FFFFFF +#define RIWBAR_BADD_VAL_SHIFT 12 +#define RIWBAR_BADD_MASK 0x003FFFFF +#define RIWAR_ENABLE 0x80000000 +#define RIWAR_TGINT_LOCAL 0x00F00000 +#define RIWAR_RDTYP_NO_SNOOP 0x00040000 +#define RIWAR_RDTYP_SNOOP 0x00050000 +#define RIWAR_WRTYP_NO_SNOOP 0x00004000 +#define RIWAR_WRTYP_SNOOP 0x00005000 +#define RIWAR_WRTYP_ALLOC 0x00006000 +#define RIWAR_SIZE_MASK 0x0000003F + #define __fsl_read_rio_config(x, addr, err, op) \ __asm__ __volatile__( \ "1: "op" %1,0(%2)\n" \ @@ -266,6 +279,89 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, return 0; } +static void fsl_rio_inbound_mem_init(struct rio_priv *priv) +{ + int i; + + /* close inbound windows */ + for (i = 0; i < RIO_INB_ATMU_COUNT; i++) + out_be32(&priv->inb_atmu_regs[i].riwar, 0); +} + +int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, + u64 rstart, u32 size, u32 flags) +{ + struct rio_priv *priv = mport->priv; + u32 base_size; + unsigned int base_size_log; + u64 win_start, win_end; + u32 riwar; + int i; + + if ((size & (size - 1)) != 0) + return -EINVAL; + + base_size_log = ilog2(size); + base_size = 1 << base_size_log; + + /* check if addresses are aligned with the window size */ + if (lstart & (base_size - 1)) + return -EINVAL; + if (rstart & (base_size - 1)) + return -EINVAL; + + /* check for conflicting ranges */ + for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { + riwar = in_be32(&priv->inb_atmu_regs[i].riwar); + if ((riwar & RIWAR_ENABLE) == 0) + continue; + win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK)) + << RIWBAR_BADD_VAL_SHIFT; + win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1); + if (rstart < win_end && (rstart + size) > win_start) + return -EINVAL; + } + + /* find unused atmu */ + for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { + riwar = in_be32(&priv->inb_atmu_regs[i].riwar); + if ((riwar & RIWAR_ENABLE) == 0) + break; + } + if (i >= RIO_INB_ATMU_COUNT) + return -ENOMEM; + + out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT); + out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT); + out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL | + RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1)); + + return 0; +} + +void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart) +{ + u32 win_start_shift, base_start_shift; + struct rio_priv *priv = mport->priv; + u32 riwar, riwtar; + int i; + + /* skip default window */ + base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT; + for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { + riwar = in_be32(&priv->inb_atmu_regs[i].riwar); + if ((riwar & RIWAR_ENABLE) == 0) + continue; + + riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar); + win_start_shift = riwtar & RIWTAR_TRAD_MASK; + if (win_start_shift == base_start_shift) { + out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE); + return; + } + } +} + void fsl_rio_port_error_handler(int offset) { /*XXX: Error recovery is not implemented, we just clear errors */ @@ -389,6 +485,8 @@ int fsl_rio_setup(struct platform_device *dev) ops->add_outb_message = fsl_add_outb_message; ops->add_inb_buffer = fsl_add_inb_buffer; ops->get_inb_message = fsl_get_inb_message; + ops->map_inb = fsl_map_inb_mem; + ops->unmap_inb = fsl_unmap_inb_mem; rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0); if (!rmu_node) { @@ -602,6 +700,11 @@ int fsl_rio_setup(struct platform_device *dev) RIO_ATMU_REGS_PORT2_OFFSET)); priv->maint_atmu_regs = priv->atmu_regs + 1; + priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *) + (priv->regs_win + + ((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET : + RIO_INB_ATMU_REGS_PORT2_OFFSET)); + /* Set to receive any dist ID for serial RapidIO controller. */ if (port->phy_type == RIO_PHY_SERIAL) @@ -620,6 +723,7 @@ int fsl_rio_setup(struct platform_device *dev) rio_law_start = range_start; fsl_rio_setup_rmu(port, rmu_np[i]); + fsl_rio_inbound_mem_init(priv); dbell->mport[i] = port; diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h index ae8e274..d53407a 100644 --- a/arch/powerpc/sysdev/fsl_rio.h +++ b/arch/powerpc/sysdev/fsl_rio.h @@ -50,9 +50,12 @@ #define RIO_S_DBELL_REGS_OFFSET 0x13400 #define RIO_S_PW_REGS_OFFSET 0x134e0 #define RIO_ATMU_REGS_DBELL_OFFSET 0x10C40 +#define RIO_INB_ATMU_REGS_PORT1_OFFSET 0x10d60 +#define RIO_INB_ATMU_REGS_PORT2_OFFSET 0x10f60 #define MAX_MSG_UNIT_NUM 2 #define MAX_PORT_NUM 4 +#define RIO_INB_ATMU_COUNT 4 struct rio_atmu_regs { u32 rowtar; @@ -63,6 +66,15 @@ struct rio_atmu_regs { u32 pad2[3]; }; +struct rio_inb_atmu_regs { + u32 riwtar; + u32 pad1; + u32 riwbar; + u32 pad2; + u32 riwar; + u32 pad3[3]; +}; + struct rio_dbell_ring { void *virt; dma_addr_t phys; @@ -99,6 +111,7 @@ struct rio_priv { void __iomem *regs_win; struct rio_atmu_regs __iomem *atmu_regs; struct rio_atmu_regs __iomem *maint_atmu_regs; + struct rio_inb_atmu_regs __iomem *inb_atmu_regs; void __iomem *maint_win; void *rmm_handle; /* RapidIO message manager(unit) Handle */ }; -- 1.7.10.4 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev