Add printk levels to some places in the powerpc port. Signed-off-by: Anton Blanchard <an...@samba.org> --- arch/powerpc/include/asm/pgtable-ppc32.h | 4 ++-- arch/powerpc/include/asm/pgtable-ppc64-4k.h | 2 +- arch/powerpc/include/asm/pgtable-ppc64.h | 6 +++--- arch/powerpc/kernel/irq.c | 6 +++--- arch/powerpc/kernel/setup-common.c | 2 +- arch/powerpc/kernel/setup_64.c | 20 ++++++++++---------- 6 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index 622672f..945e47a 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -48,10 +48,10 @@ extern int icache_44x_need_flush; #define FIRST_USER_ADDRESS 0 #define pte_ERROR(e) \ - printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ + pr_err("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ (unsigned long long)pte_val(e)) #define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) /* * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary diff --git a/arch/powerpc/include/asm/pgtable-ppc64-4k.h b/arch/powerpc/include/asm/pgtable-ppc64-4k.h index 12798c9..7b93568 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64-4k.h +++ b/arch/powerpc/include/asm/pgtable-ppc64-4k.h @@ -64,7 +64,7 @@ (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))) #define pud_ERROR(e) \ - printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) + pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) /* * On all 4K setups, remap_4k_pfn() equates to remap_pfn_range() */ diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index 7b3d54f..ae153c4 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -328,11 +328,11 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) #define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0) #define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) + pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) #define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) + pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) #define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) /* Encode and de-code a swap entry */ #define __swp_type(entry) (((entry).val >> 1) & 0x3f) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 4c5891d..8eb857f 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -444,13 +444,13 @@ void migrate_irqs(void) cpumask_and(mask, data->affinity, map); if (cpumask_any(mask) >= nr_cpu_ids) { - printk("Breaking affinity for irq %i\n", irq); + pr_warn("Breaking affinity for irq %i\n", irq); cpumask_copy(mask, map); } if (chip->irq_set_affinity) chip->irq_set_affinity(data, mask, true); else if (desc->action && !(warned++)) - printk("Cannot set affinity for irq %i\n", irq); + pr_err("Cannot set affinity for irq %i\n", irq); } free_cpumask_var(mask); @@ -470,7 +470,7 @@ static inline void check_stack_overflow(void) /* check for stack overflow: is there less than 2KB free? */ if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { - printk("do_IRQ: stack overflow: %ld\n", + pr_err("do_IRQ: stack overflow: %ld\n", sp - sizeof(struct thread_info)); dump_stack(); } diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 0df37f5..1362cd6 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -383,7 +383,7 @@ void __init check_for_initrd(void) initrd_start = initrd_end = 0; if (initrd_start) - printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); + pr_info("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); DBG(" <- check_for_initrd()\n"); #endif /* CONFIG_BLK_DEV_INITRD */ diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index a3ba9d0..a8c9620 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -522,26 +522,26 @@ void __init setup_system(void) smp_release_cpus(); #endif - printk("Starting Linux PPC64 %s\n", init_utsname()->version); + pr_info("Starting Linux PPC64 %s\n", init_utsname()->version); - printk("-----------------------------------------------------\n"); - printk("ppc64_pft_size = 0x%llx\n", ppc64_pft_size); - printk("physicalMemorySize = 0x%llx\n", memblock_phys_mem_size()); + pr_info("-----------------------------------------------------\n"); + pr_info("ppc64_pft_size = 0x%llx\n", ppc64_pft_size); + pr_info("physicalMemorySize = 0x%llx\n", memblock_phys_mem_size()); if (ppc64_caches.dline_size != 0x80) - printk("ppc64_caches.dcache_line_size = 0x%x\n", + pr_info("ppc64_caches.dcache_line_size = 0x%x\n", ppc64_caches.dline_size); if (ppc64_caches.iline_size != 0x80) - printk("ppc64_caches.icache_line_size = 0x%x\n", + pr_info("ppc64_caches.icache_line_size = 0x%x\n", ppc64_caches.iline_size); #ifdef CONFIG_PPC_STD_MMU_64 if (htab_address) - printk("htab_address = 0x%p\n", htab_address); - printk("htab_hash_mask = 0x%lx\n", htab_hash_mask); + pr_info("htab_address = 0x%p\n", htab_address); + pr_info("htab_hash_mask = 0x%lx\n", htab_hash_mask); #endif /* CONFIG_PPC_STD_MMU_64 */ if (PHYSICAL_START > 0) - printk("physical_start = 0x%llx\n", + pr_info("physical_start = 0x%llx\n", (unsigned long long)PHYSICAL_START); - printk("-----------------------------------------------------\n"); + pr_info("-----------------------------------------------------\n"); DBG(" <- setup_system()\n"); } -- 1.9.1 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev