On Fri, 2014-09-26 at 12:37 -0400, Bob Cochran wrote: > On 09/17/2014 07:08 AM, Igal.Liberman wrote: > > From: Igal Liberman <igal.liber...@freescale.com> > > > > The Frame Manager (FMan) combines the Ethernet network interfaces with > > packet > > distribution logic to provide intelligent distribution and queuing decisions > > for incoming traffic at line rate. > > > > This binding document describes Freescale's Frame Manager hardware > > attributes > > that are used by the Frame Manager driver for its basic initialization and > > configuration. > > > > Difference between [V1] and [V2]: > > Addressed all comments recieved from Scott in [V1] > > > > Signed-off-by: Igal Liberman <igal.liber...@freescale.com> > > > Is there a reference (FMAN) dts file I can compare this against? I was > reviewing this against my (combined) dts file for my t1040rdb built with > either FSL's SDK1.6 or Yocto Project meta-fsl-ppc master branch, and I'm > not finding a good match between the nodes / properties in my dts file > and what you have here. > > For example, I don't find the required "clocks" or > "fsl,qman-channel-range" properties under my <fman0: fman@400000 ...> > node. > > I'm wondering if this document is trailing or leading the source in the > latest published FSL SDK (1.6).
The SDK's device tree binding was not considered suitable and we've started from scratch for upstream. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev