In current implementation, the DMA32 segments required by one specific
PE isn't calculated with the information hold in the PE independently.
It conflicts with the PCI hotplug design: PE centralized, meaning the
PE's DMA32 segments should be calculated from the information hold in
the PE independently.
This moves the logic calculating PE's consumed DMA32 segments from
pnv_pci_ioda1_setup_dma() to pnv_pci_ioda1_setup_dma_pe() so that PE's
DMA32 segments are calculated/allocated from the information hold in
the PE (DMA32 weight). Also the logic is improved: we try to allocate
as much DMA32 segments as we can. It's acceptable that number of DMA32
segments less than the expected number are allocated.
Signed-off-by: Gavin Shan <gws...@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 119 ++++++++++++++----------------
1 file changed, 57 insertions(+), 62 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
b/arch/powerpc/platforms/powernv/pci-ioda.c
index fdbc012..0e66c4d 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1830,15 +1830,23 @@ static unsigned int pnv_pci_ioda_pe_dma_weight(struct
pnv_ioda_pe *pe)
return weight;
}
+static unsigned int pnv_pci_ioda_total_dma_weight(struct pnv_phb *phb)
+{
+ unsigned int weight = 0;
+
+ pci_walk_bus(phb->hose->bus, pnv_pci_ioda_dev_dma_weight, &weight);
+ return weight;
+}
+
static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
- struct pnv_ioda_pe *pe,
- unsigned int base,
- unsigned int segs)
+ struct pnv_ioda_pe *pe)
{
struct page *tce_mem = NULL;
struct iommu_table *tbl;
- unsigned int tce32_segsz, i;
+ unsigned int weight, total_weight;
+ unsigned int tce32_segsz, base, segs, i;
+ bool found;
int64_t rc;
void *addr;
@@ -1846,12 +1854,55 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb
*phb,
/* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
/* XXX FIXME: Allocate multi-level tables on PHB3 */
+ total_weight = pnv_pci_ioda_total_dma_weight(phb);
+ weight = pnv_pci_ioda_pe_dma_weight(pe);
+ if (!total_weight || !weight)
+ return;
+
+ segs = (weight * phb->ioda.dma32_count) / total_weight;
+ if (!segs)
+ segs = 1;
+
+ /*
+ * Allocate continuous DMA32 segments. We begin with the expected
+ * number of segments. With one more attempt, the number of DMA32
+ * segments to be allocated is decreased by one until one segment
+ * is allocated successfully.
+ */
+ while (segs) {
+ found = false;
+ for (base = 0; base <= phb->ioda.dma32_count - segs; base++) {
+ for (i = base; i < base + segs; i++) {
+ if (phb->ioda.dma32_segmap[i] !=
+ IODA_INVALID_PE)
+ break;
+ }
+
+ if (i >= base + segs) {
+ found = true;
+ break;
+ }
+ }
+
+ if (found)
+ break;
+
+ segs--;
+ }
+
+ if (!segs) {
+ pe_warn(pe, "No available DMA32 resource\n");
+ return;
+ }
+
tbl = pnv_pci_table_alloc(phb->hose->node);
iommu_register_group(&pe->table_group, phb->hose->global_number,
pe->pe_number);
pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group);
/* Grab a 32-bit TCE table */
+ pe_info(pe, "DMA weight %d (%d), assigned %d DMA32 segments\n",
+ weight, total_weight, segs);
pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
base * PNV_IODA1_DMA32_SEGSIZE,
(base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1);
@@ -2362,68 +2413,12 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb
*phb,
static void pnv_pci_ioda1_setup_dma(struct pnv_phb *phb)
{
- struct pci_controller *hose = phb->hose;
- unsigned int weight, total_weight, dma_pe_count;
- unsigned int residual, remaining, segs, base;
struct pnv_ioda_pe *pe;
- total_weight = 0;
- dma_pe_count = 0;
- list_for_each_entry(pe, &phb->ioda.pe_list, list) {
- weight = pnv_pci_ioda_pe_dma_weight(pe);
- if (weight > 0)
- dma_pe_count++;
-
- total_weight += weight;
- }
-
- /* If we have more PE# than segments available, hand out one
- * per PE until we run out and let the rest fail. If not,
- * then we assign at least one segment per PE, plus more based
- * on the amount of devices under that PE
- */
- if (dma_pe_count > phb->ioda.dma32_count)
- residual = 0;
- else
- residual = phb->ioda.dma32_count - dma_pe_count;
-
- pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n",
- hose->global_number, phb->ioda.dma32_count);
- pr_info("PCI: %d PE# for a total weight of %d\n",
- dma_pe_count, total_weight);
-
pnv_pci_ioda_setup_opal_tce_kill(phb);
- /* Walk our PE list and configure their DMA segments, hand them
- * out one base segment plus any residual segments based on
- * weight
- */
- remaining = phb->ioda.dma32_count;
- base = 0;
- list_for_each_entry(pe, &phb->ioda.pe_list, list) {
- weight = pnv_pci_ioda_pe_dma_weight(pe);
- if (!weight)
- continue;
-
- if (!remaining) {
- pe_warn(pe, "No DMA32 resources available\n");
- continue;
- }
- segs = 1;
- if (residual) {
- segs += ((weight * residual) + (total_weight / 2)) /
- total_weight;
- if (segs > remaining)
- segs = remaining;
- }
-
- pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
- weight, segs);
- pnv_pci_ioda1_setup_dma_pe(phb, pe, base, segs);
-
- remaining -= segs;
- base += segs;
- }
+ list_for_each_entry(pe, &phb->ioda.pe_list, list)
+ pnv_pci_ioda1_setup_dma_pe(phb, pe);
}
static void pnv_pci_ioda2_setup_dma(struct pnv_phb *phb)
--
2.1.0
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
