Hi! When running a newer kernel on the MPC8349E-mITX development board, I do the following changes to mpc834x_sys.c in order to get the PHY working:
diff -urN linux-2.6.17.4.orig/arch/ppc/platforms/83xx/mpc834x_sys.c
linux-2.6.17.4/arch/ppc/platforms/83xx/mpc834x_sys.c
--- linux-2.6.17.4.orig/arch/ppc/platforms/83xx/mpc834x_sys.c 2006-07-06
22:02:28.000000000 +0200
+++ linux-2.6.17.4/arch/ppc/platforms/83xx/mpc834x_sys.c 2006-07-24
10:10:36.000000000 +0200
@@ -130,7 +130,7 @@
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->bus_id = 0;
- pdata->phy_id = 0;
+ pdata->phy_id = 0x1c;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
@@ -138,7 +138,7 @@
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->bus_id = 0;
- pdata->phy_id = 1;
+ pdata->phy_id = 0x1f;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
Is this really the best way to do it, or would it be preferable to do it
some other way?
Cheers // Fredrik Roubert
--
Visserij 192 | +32 473 344527 / +46 708 776974
BE-9000 Gent | http://www.df.lth.se/~roubert/
pgp06iCh6xLMk.pgp
Description: PGP signature
_______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
