On 9/28/06, Pradeep Sampath <[EMAIL PROTECTED]> wrote: > Hi All, > > I am new to hardware design and in general embedded development. I am trying > to run linux kernel 2.6 on a Xilinx ML403 dev board. I followed the steps > indicated by Ameet Patil - > http://www.linux.get2knowmore.com/2006/06/30/quick-guide-linux-26-on-xilinx-virtex-ii-pro-boards-part-i/. > When I bootup the dev board from compact flash nothing shows up on the > serial terminal. But i see the flash download complete on the LCD display.
Your new system.ace should not display anything on the LCD. Double check your SysACE config dip switches on the board. Alternately, clear out the DOS partition of your CF card and put nothing on it except your new system.ace. That way you know that you're not inadvertently booting the wrong .ace file. g. -- Grant Likely, B.Sc. P.Eng. Secret Lab Technologies Ltd. [EMAIL PROTECTED] (403) 399-0195 _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
