Looking at your printout from IFCONFIG, your link is receiving but not transmitting. It attempted to send one packet, but got a carrier sense lost error (error=1, carrier=1). This can be caused by a mismatch in duplex setting between the FEC and the PHY. If the FEC is in half duplex, it will expect to see carrier during its own transmissions. If the PHY is in full duplex, the carrier will be absent causing the error.
Make sure that the DRT bit in the R_CNTRL register and the FDEN bit in the X_CNTRL register are set correctly according to the duplex mode under which the PHY is operating. Ken Poole MRV Communications, Inc. [EMAIL PROTECTED] _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
