Hello, I have a problem on debugging my target board TQM885 (ELDK, Linux 2.4.25) with gdb/gdbserver . My Testprogram is a simple helloworld. The program itself is running as expected, but its not possible to debug. Would be very glad, if anyone can help me. Target and Host are in different subnets, but this is solved via route add.. command ___________________ Host running gdb: [EMAIL PROTECTED]:~/autoconf_tests/hello_GNU-0.1> gdb ./hello_GNU GNU gdb 6.3 Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i586-suse-linux"...Using host libthread_db library "/lib/tls/libthread_db.so.1".
(gdb) target remote 192.168.10.232:5000 Remote debugging using 192.168.10.232:5000 Couldn't establish connection to remote target Remote sent bad register number 40: 3000ef14; Packet: 'T0501:7ffffed0;40:3000ef14;' (gdb) __________________________ and the target running gdbserver: root@/># gdbserver 192.168.2.21:5000 ./hello_GNU Process ./hello_GNU created; pid = 56 Remote debugging from host 192.168.2.21 readchar: Got EOF Remote side has terminated connection. GDBserver will reopen the connection. __________________ Any help is very appreciated Dr. Otto Parzhuber Munich University of Applied Sciences Fac. of Precision Engineering _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded