Can I see your xparameters.h and kernel .config files please? EDK project can help as well, or at least MHS & MSS files along with BSP TCL scripts - I think you use some Linux BSP, right?
Also how do you load kernel - using u-boot? If so, can you please define DEBUG in cmd_bootm.c file and send me output? Thanks, Leonid. ________________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Luca Manai Sent: Thursday, February 22, 2007 5:48 AM To: linuxppc-embedded@ozlabs.org Subject: Help with a board similar to the Xilinx ML403 Hello. I would need some help to understand what is the problem... I am a bit lost... The board is very similar to the Xilinx ML403 with a Virtex-4 and PPC 405. What can I provide to make the debugging easier? Can the problem be the content of the initrd RAM disk? Thanks for your help. Luca. =========================================================================== loaded at: 00400000 0065213C board data at: 00650124 0065013C relocated to: 0040408C 004040A4 zimage at: 00404E19 004F055F initrd at: 004F1000 0064FE30 avail ram: 00653000 04000000 Linux/PPC load: console=ttyS0,9600 Uncompressing Linux...done. Now booting the kernel [ 0.000000] Linux version 2.6.20 ([EMAIL PROTECTED]) (gcc version 3.4.4) #24 Thu Feb 22 14:26:45 CET 2007 [ 0.000000] Xilinx ML403 Reference System (Virtex-4 FX) [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 16384 [ 0.000000] Normal 16384 -> 16384 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 16384 [ 0.000000] Built 1 zonelists. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,9600 [ 0.000000] Xilinx INTC #0 at 0x05810000 mapped to 0xFDFFE000 [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) [ 0.000254] Console: colour dummy device 80x25 [ 0.001029] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.002145] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.022641] Memory: 61408k available (1560k kernel code, 432k data, 100k init, 0k highmem) [ 0.208605] Mount-cache hash table entries: 512 [ 0.215183] NET: Registered protocol family 16 [ 0.240164] NET: Registered protocol family 2 [ 0.296652] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.297952] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.298188] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.298314] TCP: Hash tables configured (established 2048 bind 1024) [ 0.298347] TCP reno registered [ 0.317702] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd [ 1.078167] Freeing initrd memory: 1403k freed [ 1.085007] io scheduler noop registered [ 1.085068] io scheduler anticipatory registered (default) [ 1.085098] io scheduler deadline registered [ 1.085303] io scheduler cfq registered [ 1.158419] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 1.166897] serial8250.0: ttyS0 at MMIO 0x6001003 (irq = 5) is a 16550A [ 1.868935] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.901545] tun: Universal TUN/TAP device driver, 1.6 [ 1.921877] tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]> [ 1.948919] XTemac: using sgDMA mode. [ 1.963764] XTemac: using TxDRE mode [ 1.978133] XTemac: using RxDRE mode [ 1.992471] XTemac: buffer descriptor size: 32768 (0x8000) [ 2.015328] XTemac: (buffer_descriptor_init) phy: 0x610000, virt: 0xff100000, size: 0x8000 [ 2.055149] eth0: Dropping NETIF_F_SG since no checksum feature. [ 2.080791] eth0: Xilinx TEMAC #0 at 0xFFE00000 mapped to 0xC5000000, irq=4 [ 2.108767] eth0: XTemac id 1.0f, block id 5, type 8 [ 2.129728] mice: PS/2 mouse device common for all mice [ 2.151097] TCP cubic registered [ 2.164340] NET: Registered protocol family 1 [ 2.181936] NET: Registered protocol family 17 [ 2.201411] RAMDISK: Compressed image found at block 0 [ 3.229002] VFS: Mounted root (ext2 filesystem). [ 3.355400] ------------[ cut here ]------------ [ 3.373911] kernel BUG at mm/prio_tree.c:79! [ 3.390991] Oops: Exception in kernel mode, sig: 5 [#1] [ 3.411889] NIP: C003FA34 LR: C0044D68 CTR: 00000000 [ 3.431752] REGS: c04b7dc0 TRAP: 0700 Not tainted (2.6.20) [ 3.454721] MSR: 00029030 <EE,ME,IR,DR> CR: 44088048 XER: 2000000E [ 3.480351] TASK = c02a9490[140] 'ifconfig' THREAD: c04b6000 [ 3.502282] GPR00: 00000001 C04B7E70 C02A9490 C0486BA8 C044E95C C04B7E20 C04B7E24 0FFDF000 [ 3.535955] GPR08: 000000AD 00000010 0000000F 00000011 24004042 10065ABC 00000001 30017510 [ 3.569632] GPR16: 10001B05 00000000 0FFDF000 000000AD C0432B94 00000000 C0432BA8 00000000 [ 3.603306] GPR24: C0675E20 00000000 0FFF0000 C044BA00 00000000 C0486B54 C0486BA8 C0486DA0 [ 3.637713] NIP [C003FA34] vma_prio_tree_add+0x54/0xd0 [ 3.658333] LR [C0044D68] vma_adjust+0x264/0x384 [ 3.676836] Call Trace: [ 3.686598] [C04B7E70] [C0044D68] vma_adjust+0x264/0x384 (unreliable) [ 3.712428] [C04B7ED0] [C0045B2C] split_vma+0x118/0x13c [ 3.733395] [C04B7EF0] [C0046CF8] sys_mprotect+0x210/0x4dc [ 3.755370] [C04B7F40] [C0002E54] ret_from_syscall+0x0/0x3c [ 3.777723] Instruction dump: [ 3.789602] 80040008 7d675850 7c0a0050 556ba33e 5400a33e 7d295a14 7d080214 3908ffff [ 3.820807] 3929ffff 7d294278 3149ffff 7c0a4910 <0f000000> 39200000 9123002c 8004002c _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
