Hi, Thanks for providing theses. I hadn't a chance to test them yet, I'll try that this week end. A couple of comments already though :
- Is saving the SDMA / PIC registers necessary ? Doesn't the cpu keep those when at sleep ? - And if it is, won't a memcpy_io of the whole zone do the trick ? - On a more general note, there seem to be a lot of stuff decided by #ifdef ... that's not really good as we can build a single kernel that could run on several platform so those need to somehow be enable disabled dynamically. - I may miss something but turning port power off for USB seem like a sane thing to do for every one. Isn't that implemented somehow for all controller somewhere ? Sylvain Domen Puncer wrote: > Hi! > > Patches are based on latest mainline git tree + fec patches: > Fec_MPC5200_eth_driver.patch > Copy_bestcomm_support_files_into_arch_powerpc.patch > Make_FEC_work_on_the_lite5200.patch > > > This patchset includes the following patches: > - [PATCH 1/7] mpc52xx suspend: bestcomm > - [PATCH 2/7] mpc52xx suspend: UART > - [PATCH 3/7] mpc52xx suspend: FEC (ethernet) > - [PATCH 4/7] mpc52xx suspend: USB > - [PATCH 5/7] mpc52xx suspend: deep-sleep > - [PATCH 6/7] lite5200b suspend: PIC > - [u-boot patch] support lite5200b wakeup in u-boot > - [PATCH 7/7] lite5200b suspend: low-power mode > > > I would appreaciate any comments, suggestions etc. > > > Domen > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded