Hello all, I have a problem to boot a linux image in a Freescale LITE5200B, I compile a Kernel image and a rootfs image with the scripts where I found in the page http://cross-stuff.sourceforge.net/ , the LITE5200B post in the screen:
## Booting image at ff0a0000 ... Image Name: Linux MPC5200 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1298549 Bytes = 1.2 MB Load Address: 00000000 Entry Point: 00000000 Uncompressing Kernel Image ... OK id mach(): done MMU:enter MMU:hw init MMU:mapin MMU:setio MMU:exit setup_arch: enter setup_arch: bootmem arch: exit and my variables are: => printenv baudrate=115200 preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo skipnetcheck=y skippcicheck=y skipidecheck=y verify=n netdev=eth0 nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) ramargs=setenv bootargs root=/dev/ram rw addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off panic=1 flash_nfs=run nfsargs addip;bootm $(kernel_addr) flash_self=run ramargs addip;bootm $(kernel_addr) $(ramdisk_addr) net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm rootpath=/opt/eldk/ppc_82xx autoload=no autostart=no ethaddr=00:04:9f:00:5b:46 ethact=FEC ETHERNET mtd_args=setenv bootargs root=8.142.77:10.48.142.152:10.48.142.152:255.255.255.0:::off jff2args=setenv bootargs root=/dev/mtdblock0 rw rootfstype=jffs2 flash_jffs2=run jffs2args kernel_adrr=0xFF0A0000 kernel_addr=0xFF0A0000 hostname=dhcp30-56139 dnsip=10.30.1.2 bootfile=uImage-LITE5200 ipddr=192.168.0.20 filesize=f8 fileaddr=200000 gatewayip=192.168.0.1 netmask=255.255.0.0 ipaddr=192.168.0.20 serverip=192.168.0.11 bootdelay=3 bootargs=root=/dev/mtdblock3 ro console=ttyS1 rootfstype=jffs2 bootcmd=bootm 0xFF0A0000 stdin=serial stdout=serial stderr=serial Environment size: 1348/65524 bytes somebody knows that it happens?? Thanks _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded