Hi: Does anybody use u-boot+linux on ML403 board? If yes, can somebody give me kernel or kernel patch to any open source kernel tree (DENX or kernel.org).
I couldn't prepare uImage which is working with u-boot on ML403 board - it hangs forever: TFTP from server 192.168.0.141; our IP address is 192.168.0.203 Filename 'LM200/rel/1.0.1d-403/uImage'. Load address: 0x400000 Loading: T ################################################################# ################################################################# ####################################### done Bytes transferred = 861911 (d26d7 hex) ## Booting image at 00400000 ... Image Name: Linux-2.6.19.2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 861847 Bytes = 841.6 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Current stack ends at 0x03E676F0 => set upper limit to 0x00800000 Board Info pointer (kbd) at 007ffe80 ## cmdline at 0x007FFF00 ... 0x007FFFF8 memstart = 0x00000000 memsize = 0x04000000 flashstart = 0x28000000 flashsize = 0x00800000 flashoffset = 0x00000000 sramstart = 0x00000000 sramsize = 0x00000000 bootflags = 0x00000000 procfreq = 300 MHz plb_busfreq = 100 MHz ethaddr = 00:01:02:CB:CB:71 IP addr = 192.168.0.203 baudrate = 115200 bps No initrd ## Transferring control to Linux (at address 00000000) .. Thanks, Leonid. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded