On 24/04/07 17:01 +0530, Pradyumna Sampath wrote: > Hi Everyone, > > I have been trying to get the linux-2.6.20-rt3 for arch/powerpc to > boot on my lite5200b. Here are the things that I have tried so far. I > have a custom board based on the lite5200b and then the evaluation > board too. > > - I have a working 2.6.16-rt29 kernel compiled using ARCH=ppc for both > these boards. > > - I tried the default configs for lite5200 for both the custom board > and the EVB. Both hang at "Transferring control to Linux (at address > 00000000) ..."
Device tree missing? You need to compile it with dtc, then in u-boot use something like: bootp; tftp 0x400000 uImage.ppc; tftp 0x600000 lite5200b.dtb set your bootargs bootm 0x400000 - 0x600000 > > - I downloaded roberts > http://www.pengutronix.de/oselas/bsp/phytec/index_en.html#phyCORE-MPC5200B-tiny > patches, but still ended up with the same result. > > I read ( > http://www.nabble.com/Re%3A-MPC52xx-support-rework-for-2.6.20-p7568655.html > ) that the arch/powerpc port for lite5200 works right out of the box. > Am I doing something wrong ? > > The one thing I am yet to try is to do a git checkout from > git.secretlabs.ca. Unfortunately thanks to some internal firewalling > policies I still have not been able to do that. kernel.org tree will also work with lite5200b, if you need ethernet download fec/bestcomm patches from Grant's tree. Domen _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
