I find this usually happens when /dev/tty, /dev/console or /dev/ttyS0 are not setup properly. That is, they are files instead of nodes. This menas you have mounted the root filesystem and init is running on that root filesystem.
Charles -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adrian Craine Sent: Tuesday, May 08, 2007 2:50 PM To: Leonid Cc: linuxppc-embedded@ozlabs.org; Mirek23 Subject: Re: zImage.elf loads but does not start Leonid wrote: > rootpath= > [ 9.130834] Looking up port of RPC 100003/2 on 129.129.130.106 > [ 9.207363] Looking up port of RPC 100005/1 on 129.129.130.106 > [ 9.303794] VFS: Mounted root (nfs filesystem). > [ 9.359316] Freeing unused kernel memory: 96k init > [ 9.422162] Warning: unable to open an initial console. > > The exact device node this requires is /dev/console c 5 1 That should solve your issue. Cheers, Adrian. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded