Hi, Sasvata! > We are using a RHEL/386 machine to cross-compile for Debian/PowerPC > (8260) target, a few year old embedded system that we inherited. The > kernel is 2.4.9. Using crosstools, and following Dan Kegel's notes, the > combo we have is gcc-2.95-3/glibc-2.2.5. > > Does anybody have any working version using newer versions of the 2.4 > kernel and newer GCC versions for a powerpc-603e target? One motivation > is to use BusyBox-1.5.1, but I am told on that list that GCC 2/x is too > old (I tried before I asked, it doesn't compile).
It's propably painful to work your way through crosstools with such an old toolchain. I would have a look if one of the ELDK's from http://www.denx.de can be used for your board - at least for a good start. If you run into problems with older linux-2.4 kernel version with the newer ELDK's, you can also go back to some older version? > Any help, pointers, example config files for crosstools, etc. would be > really appreciated! You are always welcome at their mailing list. See: http://kegel.com/crosstool Best greets, -- Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded