On 31/05/07 13:42 -0000, Daniel Schnell wrote: > Hi, > > I am trying to bring up 2.6.20.3 on a MPC5200B based custom board. This > Kernel is based on the Phytec phyCore MPC5200B Mini BSP kernel and > adapted to my board. > So far I have troubles to get console output working when booting Linux. > Uboot console output is fine. Linux begins to run (I can set breakpoints > with the BDI2000 in the early initialization code) so I probably have a > misconfiguration of the console output inside the fdt. > > The major difference between the Phytec phyCore 5200B mini fdt and mine > is that we use PSC1 instead of PSC3/6 for serial. Accordingly I changed > the fdt (or dts) values. > > To get some more insights, I would like to know, in which Linux function > the console output is initialised ? > > ... > If I dump the flat device tree inside uboot, I get the following > entries: ... the dump with:
reg = <8>; in most of nodes, which looks just wrong. Domen _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded