Hi Im trying to get linux 2.6 to run on my ML410 board from xilinx. I just created a real simple system with a Uartlite DDR2 and DDR interupt controller and sysace. I installed the patches I found for Uartlite and sysace I found here. I boot the zImage with XMD with the following commands: dow t:/zImage.elf con This is what I get out the serial port: loaded at: 00400000 00537138 board data at: 00000000 00000018 relocated to: 00404064 0040407C zimage at: 00404E6D 005345F1 avail ram: 00538000 7C7F1B78
Linux/PPC load: console=ttyUL0,9600 root=/dev/xsysace/disc0/part3 rw Uncompressing Linux...done. Now booting the kernel It always stall on the Now booting the kernel. Im new to linux building and any help or suggestions are greatly appreciated. Thanks Kevin -- View this message in context: http://www.nabble.com/Porting-Linux-to-Xilinx-ML410-tf3989483.html#a11328063 Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded