I've attached some patches Freescale has developed and sent Dan K. to include into crosstool. Feel free to use these until Dan K. incorporates them into crosstool:
http://gate.crashing.org/~galak/crosstool-0.28-rc37-e500.patch.bz2 http://gate.crashing.org/~galak/crosstool-0.28-extra-patches.patch.bz2 Two patches are needed for crosstool-0.28-rc37, and are attached: 1/ e500 toolchain patch. This patch contains the following: - spe patches for glibc-2.3.2 and glibc-2.3.2, - gcc-3.4.3-e500-glibc-2.3.3-spe.dat - powerpc-e500.dat - powerpc-e500.config (e500 kernel config for 2.6.9) - demo-e500.sh demo-e500.sh will build an e500 toolchain comprising gcc-3.4.3 glibc-2.3.3, and binutils-2.15 2/ getandpatch EXTRA_PATCHES patch. This is a patch for getandpatch to permit additional patches (in addition to the standard crosstool patches) that are needed to be applied for a toolchain build. To do this the environment variable EXTRA_PATCHES is set to the name of the patches needed. For example when building the e500 toolchain EXTRA_PATCHES needs to be set to "spe" to apply the spe patches to glibc. The glibc spe patches are located in: crosstool-0.28-rc37/patches/glibc-2.3.2-spe The advantage that this gives is that all the standard crosstool patches for glibc-2.3.2 can remain in their original directory, and the spe patches are applied in addition to the normal glibc patches. - kumar On Jan 9, 2005, at 11:21 PM, Aubrey Lee wrote: > Hi, I want to build cross tools for PowerQUICCIII?mpc8540, e500 > core?, > Had anyone built cross tools successfully by cross-tools-0.28? > What type of target should I set? Could you tell me the versions > you have used? > Thank you! > Best regards > > Aubrey > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
