Perhaps you need to put a good ide support in the kernel ? Your kernel doesn't seem to "see" your ide driver. Can you send your .config file ?
Le mar, 25 sep 2001 11:57:08, yah a ?crit : > > Hi,all. > I use MCP750 and linuxppc_2_4. I recompiled the kernel, use > bugboot,fill it in the onboard flash(bank A), and I put root file system > on ATA flash(hda1).Then I boot the system,but failed. Following is the > boot info. > > Linux/PPC load: root=/dev/hda1 init=/bin/init > Uncompressing Linux...done. > Now booting the kernel > Ramsize from residual data was 0 -- Probing for value > Ramsize default to be 32M > Total memory = 32MB; using 128kB for hash table (at c0160000) > Linux version 2.4.6-pre2 (root at amy.w-ibeda.com) (gcc version 2.95.2 > 19991024 (r1 > PReP architecture > On node 0 totalpages: 8192 > zone(0): 8192 pages. > zone(1): 0 pages. > zone(2): 0 pages. > Kernel command line: root=/dev/hda1 init=/bin/init > time_init: decrementer frequency = 16.666516 MHz > Calibrating delay loop... 732.36 BogoMIPS > Memory: 30676k available (820k kernel code, 460k data, 92k init, 0k > highmem) > Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes) > Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) > Page-cache hash table entries: 8192 (order: 3, 32768 bytes) > POSIX conformance testing by UNIFIX > PCI: Probing PCI hardware > Fixup mem res, dev: 0.0, res_start: ffffff00->bfffff00 > PCI: device 00:06.0 has unknown header type 7f, ignoring. > PCI: device 00:07.0 has unknown header type 7f, ignoring. > PCI: device 00:0b.0 has unknown header type 7f, ignoring. > Fixup mem res, dev: 0.10, res_start: ffff0000->bfff0000 > Fixup mem res, dev: 0.11, res_start: ffff0000->bfff0000 > Fixup mem res, dev: 0.12, res_start: ffff0000->bfff0000 > Fixup mem res, dev: 0.13, res_start: ffff0000->bfff0000 > Fixup mem res, dev: 0.14, res_start: ffff0000->bfff0000 > Fixup mem res, dev: 0.15, res_start: ffff0000->bfff0000 > Fixup mem res, dev: 0.16, res_start: ffff0000->bfff0000 > Setting PCI interrupts for a "Mesquite cPCI (MCP750) w/ HAC" > Relocating PCI address cf20fffc -> 120fffc > PCI:0:0:0: Resource 00fffffc-00ffffff (f=10f) > PCI:0:0:0: Resource bfffff00-bfffffff (f=200) > PCI:0:1:0: Resource 0000fffc-0000ffff (f=10f) > PCI:0:10:0: Resource bfff0000-bfffffff (f=200) > PCI: Cannot allocate resource region 4 of device 00:10.0 > PCI:0:11:0: Resource bfff0000-bfffffff (f=200) > PCI: Cannot allocate resource region 4 of device 00:11.0 > PCI:0:12:0: Resource bfff0000-bfffffff (f=200) > PCI: Cannot allocate resource region 4 of device 00:12.0 > PCI:0:13:0: Resource bfff0000-bfffffff (f=200) > PCI: Cannot allocate resource region 4 of device 00:13.0 > PCI:0:14:0: Resource bfff0000-bfffffff (f=200) > PCI: Cannot allocate resource region 4 of device 00:14.0 > PCI:0:15:0: Resource bfff0000-bfffffff (f=200) > PCI: Cannot allocate resource region 4 of device 00:15.0 > PCI:0:16:0: Resource bfff0000-bfffffff (f=200) > PCI: Cannot allocate resource region 4 of device 00:16.0 > PCI:0:3:0: Resource 0120fffc-0120ffff (f=10f) > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Starting kswapd v1.8 > Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ > SERIAL_PCI ed > ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > block: queued sectors max/low 20304kB/6768kB, 64 slots per queue > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP > IP: routing cache hash table of 512 buckets, 4Kbytes > TCP: Hash tables configured (established 2048 bind 2048) > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > request_module[block-major-3]: Root fs not mounted > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > VFS: Cannot open root device "hda1" or 03:01 > Please append a correct "root=" boot option > Kernel panic: VFS: Unable to mount root fs on 03:01 > Rebooting in 180 seconds.. > > Any ideas? > ------------------------------------------------ > ????????????????????????????????21cn???????????? > http://member.21cn.com/economy/upgrade.php > ???????????????? > http://adinfo.21cn.com/price/001.html > ????????????????21cn?????? > http://www.21cn.com/21cnhtm/qy/index.html > > > > -- 33 (0) 1 69 15 79 59 De chacun selon ses forces, a chacun selon ses besoins ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
