I'm using a CLLF 860T with Embedded PowerPC Cross Development Kit Rev. 1.2 Hard Hat Linux. I'm very new to Linux and developing for a board. Currently, I'm booting manually (loading the kernel with tftp) using the 10 Mbps ethernet port. I had to configure the kernel to use SCC1 so the 10 Mbps line is used during the BOOTP requests.
>From the prompt in minicom I can make the cllf board ping my pc and from my pc I can ping the cllf board, and this is using the 10 Mbps line. I will also need to use the 100 Mbps line except I don't know if its possible to use both ethernet ports and how to do it. Even if I could find a way to switch between these ports, using only one port at a time, I would be happy. Surely this is possible because the 10 Mbps port and 100 Mbps port have different MAC addresses. Thanks for any help! Randy Shaw <rshaw at graftononline.net> ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
