CPM2 UARTs: Won't work under low (<= 1200BD) baudrates?

[Dan Malek]

On Aug 15, 2006, at 3:52 PM, David Tao wrote:

> Under 2400 baud or above the UARTs work fine, but once the baudrate  
> set to 1200 or below, there is NO data can be sent out or received  
> even programed to do so.

It doesn't look like we check the baud rate and
add the preceding divide-by-16 clock for the
low baud rates like we did on the original CPM.
You can add this, test it, and submit a patch if
you like :-)

Thanks.

        -- Dan