Hello, I do not know if this email is appropriate for this mailing list, but I thought I would give it a try.
Is there anyone out there who is using(or attempting to use) IPv6 with PPC and a 2.6.11 kernel with whom I could email directly with some specific questions? One of my questions is at boot time, my eth0 device does not have it's link-local address. I must issue an "ifconfig eth0 down" and then an "ifconfig eth0 up" to get this work work. Also, it does not auto-configure the info for a link-global prefix/address that is provided by the router announcements. There are PCs in my network on i686 athlons, i386 running 2.6.5 kernels that do in fact handle the above IPv6 correctly. I do understand that there are IPv6 mailing list and I do belong to them, but thus far no one has been able to assist me in these issues. I apologize if this is not the correct forum for these types of questions. Thank you, Phil Bellino ============================ Phil Bellino MRV Communications, Inc. Boston Product Division 295 Foster St. Littleton,MA 01460 Tel: (978)952-4807 Email: pbellino at mrv.com ============================ -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/ms-tnef Size: 2413 bytes Desc: not available Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050418/7009e6bb/attachment.bin