Have you copied the bd_t structure from ppcboot to linux? I had a similar problem before I did this.
See the message from David Chiu on the linuxppc-embedded list from Wed, April 11, 2001. http://lists.linuxppc.org/linuxppc-embedded/200104/msg00084.html Regards, Mark On Thu, 04 Oct 2001, Kapil Konde wrote: > > Hi all, > I am trying to load kernel using ppcboot. After I load kernel using tftp > and give bootm command I get following response. > > .... > .... > Data Size: 574121 Bytes = 560 kB = 0 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK > ## Current stack ends at 0x00FBF7F0 => set upper limit to 0x00800000 > ## cmdline at 0x007FFF00 ... 0x007FFF00 > No initrd > ## Transferring control to Linux (at address 00000000) ... > > > And nothing happens after this. Can somebody please explain. > > > Thanks and regards, > Kapilk. > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
