Hi everybody!
I?m new in this list.
I?m trying to install direct IDE on PCMCIA port on a MPC823FADS board.
(Excuse me for the long mail)
I configured the ppcboot (1.0.0) and the kernel to do this. I am using a
"PCMCIA type III ATA card".
When ppcboot starts gives the following message:
PPCBoot 1.0.0 (Oct 25 2001 - 08:08:14)
Initializing...
CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB D-Cache
Board: FADS with db MPC823 rev ENG or PILOT
DRAM: (4 MB SDRAM) 8 MB
FLASH: 2 MB
PCMCIA:unknown card type
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
When the kernel starts it gives the followinf message:
:>bootm 02880000 02940000
## Booting image at 02880000 ...
Image Name: Linux 2.4.4 en la FADS
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 534027 Bytes = 521 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 02940000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 365313 Bytes = 356 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 00705000, end 0075e301 ... OK
Linux version 2.4.4 (root at GASTONDOA2001) (gcc version 2.95.3
20010315 (release/MontaVista)) #34 mi? oct 24 14:41
On node 0 totalpages: 20
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram init=/linuxrc
Decrementer Frequency: 3000000
Calibrating delay loop... 47.82 BogoMIPS
Memory: 6216k available (996k kernel code, 412k data, 44k init, 0k
highmem)
Dentry-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 512 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS0 on SMC1 at 0x0280, BRG1
pty: 256 Unix98 ptys configured
block: queued sectors max/low 4042kB/1347kB, 64 slots per queue
RAMDISK driver initialized: 16 RAM disks of 2048K size 1024
blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
PCMCIA slot B: phys mem e0000000...e0030000 (size 00030000)
unknown card type
unknown card type
unknown card type
unknown card type
unknown card type
unknown card type
unknown card type
unknown card type
unknown card type
[429] m8xx_ide_default_irq 0
unknown card type
[429] m8xx_ide_default_irq 0
unknown card type
[429] m8xx_ide_default_irq 0
unknown card type
[429] m8xx_ide_default_irq 0
unknown card type
[429] m8xx_ide_default_irq 0
unknown card type
[429] m8xx_ide_default_irq 0
unknown card type
[429] m8xx_ide_default_irq 0
hdc: IRQ probe failed (0x0)
hdc: IRQ probe failed (0x0)
hdd: IRQ probe failed (0x0)
hdd: IRQ probe failed (0x0)
hde: IRQ probe failed (0x0)
hde: IRQ probe failed (0x0)
hdf: IRQ probe failed (0x0)
hdf: IRQ probe failed (0x0)
hdg: IRQ probe failed (0x0)
hdg: IRQ probe failed (0x0)
hdh: IRQ probe failed (0x0)
hdh: IRQ probe failed (0x0)
hdi: IRQ probe failed (0x0)
hdi: IRQ probe failed (0x0)
hdj: IRQ probe failed (0x0)
hdj: IRQ probe failed (0x0)
hdk: IRQ probe failed (0x0)
hdk: IRQ probe failed (0x0)
hdl: IRQ probe failed (0x0)
hdl: IRQ probe failed (0x0)
hdm: IRQ probe failed (0x0)
hdm: IRQ probe failed (0x0)
hdn: IRQ probe failed (0x0)
hdn: IRQ probe failed (0x0)
hdo: IRQ probe failed (0x0)
hdo: IRQ probe failed (0x0)
hdp: IRQ probe failed (0x0)
hdp: IRQ probe failed (0x0)
eth0: CPM ENET Version 0.2 on SCC2, 08:00:22:50:70:63
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 4194300k freed
loop: loaded (max 8 devices)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
IP-Config: Incomplete network configuration information.
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 44k init
### Initial RAM disk starting interactive shell ###
BusyBox v0.60.0 (2001.09.18-16:26+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
I don?t see any similar question in the mailing list.
What do i forget or what and where i am doing wrong? I?m using an
unsupported card?
Thank you for your help.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
