>The configurations I have are for 2600 with a PMC graphics board, remove >CONFIG_VT from the setup and it will use a serial console. > >BTW use PrePboot for these boards (CONFIG_PREPBOOT) since it gives a nicer >PCI layout to access the VMEbus... > >Please use the patches mvme2600.*.bz2...
I have tested the patches but the new kernel don't see the scsi device...so I can't try it anyway ! >My systems work with an SCSI disk (the basic 2600 NCR53c825). >Did you try to directly boot one of the images I have on my ftp site ? > >(If it works, you've got a configuration problem.) > > Gabriel Yes, I have tested your kernel, but there is a message ( PC keyb error... or something like this) wich lock the kernel during the boot ! It's probably due to the Virtual Terminal support in the kernel ! I always use the "console=ttyS0,9600" kernel option. In short : - I can't use your kernel because of the PC_key error ! - I can't patch & build a new kernel because this new kernel don't see my SCSI PMC ! What can I do ? Lionel ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
