Hi, I have a full working kernel with VME bus support (thx Gabriel for your patch and your help).
The problem now is that I can't have the boot args working ! During the configuration of the kernel, I write "root=/dev/sda2 console=ttyS0" in the "initial kernel command string" , and only "console=ttyS0" is shown at boot prompt and the kernel don't see my haddrive! If I use the command (in PPCBUG): GEVEDIT bootargs bootargs=root=/dev/sda2 console=ttyS0 result : same as above ! Whats wrong ? I always need to write by hand "root=/dev/sda2" ! Please help me ! Thx in advance. ------------------------------------------------------- Lionel TAILLURAT TECHNICAL SERVICE ECRIN AUTOMATISMES -industrial computer's- Rue du pr?-de-l'Horme B.P 15 38921 CROLLES CEDEX FRANCE Tel :(33) 4 76 92 20 01 Fax :(33) 4 76 08 03 18 Email: Lionel.TAILLURAT at ecrin.com --------------------------------------------------------- ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
