----- Original Message ----- From: "Dan Malek" <[EMAIL PROTECTED]> To: "Hyun-Joon Cha" <tachyon at postech.ac.kr> Cc: <linuxppc-embedded at lists.linuxppc.org> Sent: Thursday, July 27, 2000 11:00 PM Subject: Re: Req. help about SCC2 and SCC3 as ethernet.
> How do you know that is where it stops? We are currently using remote GDB with abatron BDI2000. In console_serial_write function, this function can't return any character.... > With SCC3, you are now > trying to configure Port B, which is also used for the SMC1 configuration. > Perhaps the console and kernel are working fine, and you just messed up > the I/O pins for SMC1. All pin assignments are correct, and during setting port B, we checked the pbpar,pbdir,pbodr also. nothing changed. > You will also need to make source code changes to enet.c, as it doesn't > have a standard set of instructions for configuring port B as Ethernet > control/data pins. We've changed all port configurations. > > > -- Dan > Do you have any code which enables SCC3 for ethernet on 850SAR? Thank you ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
