I'v converted ELF -> s rec -> est bin format and works fine!! ----- Original Message ----- From: "Sebastien Articlaux" <[EMAIL PROTECTED]> To: <linuxppc-embedded at lists.linuxppc.org> Sent: Wednesday, February 09, 2000 6:13 PM Subject: CUSTOM MP860 PowerQuiccMH BOARD-Need help to program Flash
> > Hello all PPC man, > > I am a student working for MATRA SI in electronic > section > We want to run linuxppc on a custom MPC860 > PowerQuiccMH board diskless,networless > with 64Mo DRAM and 4Mo Flash. > > We use EST VisionProbe to debbug and download files > into Flash and RAM. > > Sebastien Tadeoni who worked before me had built > vmlinuw.initrd with > embedded 2.2.5 and now my job is to download it to the > Flash and try to boot... > > our Flash start at 0x0 to 0x3FFFFF > RAM start at 0x8000000 > > But my problem is that when I convert vmlinux.initrd > (1.11 Mega, ELF Format) to a *.BIN > (Our emulator EST Vision Probe convert it to a BIN > format before downloading into the Flash) > there is only 26K of program code in the Flash which > start at 0x100000 > > I try to add some BIAS before download but it's the > same. > > Do you know what? > > How can be sure that my file vmlinux.initrd(ELF > Format) and my .BIN are correct ? > > I think .BIN is not good but i'm not sure... > > What do you think about that? > > Thank you in advance for your help. > > Sebastien ARTICLAUX > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
